Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.6.6 (build 3082) - 1 June 2020 (please see important announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of the NOAA report and Snow Index drop-down menus to 2030)

See the Wiki to download the software or click on the Downloads link in the Forum Banner.

DataloggerIP Vantage and Cumulus

From build 3044 the development baton passed to Mark Crossley. Mark has been responsible for all the Builds since. He has made the code available on GitHub. It is Mark's hope that others will join in this development, but at the very least he welcomes your ideas for future developments (see Cumulus MX Development suggestions).

Moderator: mcrossley

Post Reply
mimo57
Posts: 54
Joined: Wed 18 Jan 2012 8:25 pm
Weather Station: Davis Vantage PRO2
Operating System: Windows 10
Location: France / Orny

DataloggerIP Vantage and Cumulus

Post by mimo57 »

Hello,
I have since a few weeks, a new station Weather DAVIS VANTAGE PRO2 with a DATALOGGER IP. All connected to PC-Cumulus for data processing.
Unfortunately, the PC-Cumulus suffered a disk crash and the weather data could not be recorded for about 48 hours.
I understood that the DATALOGGER IP was able to store this data for a while. But by reconnecting the PC-Cumulus, it is not, not a data received the time of the cut.
Would I fail to configure some things in, Cumulus, Vantage, or whatever?
Thank you for your feedback.

water01
Posts: 1884
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: WH1081
Operating System: Windows 10 64bit
Location: Burnham-on-Sea
Contact:

Re: DataloggerIP Vantage and Cumulus

Post by water01 »

I assume, since you had a disk crash, you had to put in a new disk and rebuild the PC from the Operating System up. Or did you have backups which you restored?

If you did NOT have backups you restored and you re-installed Cumulus and have backups of the data files try using these various scenarios in the Wiki https://cumuluswiki.wxforum.net/a/FAQ#O ... t_last_ran
David
Image

mimo57
Posts: 54
Joined: Wed 18 Jan 2012 8:25 pm
Weather Station: Davis Vantage PRO2
Operating System: Windows 10
Location: France / Orny

Re: DataloggerIP Vantage and Cumulus

Post by mimo57 »

Thank you for your reply.
1) During the crash, Cumulus was stopped.
2) The station was still connected to my network with the IP datalogger.
3) I managed to clone the KO disk, on a new disk, so no reinstallation of Windows and Cumulus.
4) Once the PC has been started, and the connection between cumulus and the console is established, resuming the reading of the data at the start time of the PC. The lapse of time between the cumulus stop and restart, no data collected, whereas they should have been stored in the datalogger.

water01
Posts: 1884
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: WH1081
Operating System: Windows 10 64bit
Location: Burnham-on-Sea
Contact:

Re: DataloggerIP Vantage and Cumulus

Post by water01 »

Then I can only suggest as per the wiki you restore a backup of the complete set of files from a date prior to the crash and see if that solves the problem.
David
Image

Post Reply