Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.0.0 build 3050 - 1 May 2019.
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

See the Wiki for downloading either version.

DataloggerIP Vantage and Cumulus

Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.

Moderator: mcrossley

Post Reply
mimo57
Posts: 54
Joined: Wed 18 Jan 2012 8:25 pm
Weather Station: Davis Vantage PRO2
Operating System: Windows 10
Location: France / Orny

DataloggerIP Vantage and Cumulus

Post by mimo57 » Wed 24 Apr 2019 11:48 pm

Hello,
I have since a few weeks, a new station Weather DAVIS VANTAGE PRO2 with a DATALOGGER IP. All connected to PC-Cumulus for data processing.
Unfortunately, the PC-Cumulus suffered a disk crash and the weather data could not be recorded for about 48 hours.
I understood that the DATALOGGER IP was able to store this data for a while. But by reconnecting the PC-Cumulus, it is not, not a data received the time of the cut.
Would I fail to configure some things in, Cumulus, Vantage, or whatever?
Thank you for your feedback.

water01
Posts: 1535
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: WH1081
Operating System: Windows 7 64bit HP SP1
Location: Somewhere in the USA
Contact:

Re: DataloggerIP Vantage and Cumulus

Post by water01 » Thu 25 Apr 2019 12:59 am

I assume, since you had a disk crash, you had to put in a new disk and rebuild the PC from the Operating System up. Or did you have backups which you restored?

If you did NOT have backups you restored and you re-installed Cumulus and have backups of the data files try using these various scenarios in the Wiki https://cumuluswiki.wxforum.net/a/FAQ#O ... t_last_ran

mimo57
Posts: 54
Joined: Wed 18 Jan 2012 8:25 pm
Weather Station: Davis Vantage PRO2
Operating System: Windows 10
Location: France / Orny

Re: DataloggerIP Vantage and Cumulus

Post by mimo57 » Thu 25 Apr 2019 9:10 pm

Thank you for your reply.
1) During the crash, Cumulus was stopped.
2) The station was still connected to my network with the IP datalogger.
3) I managed to clone the KO disk, on a new disk, so no reinstallation of Windows and Cumulus.
4) Once the PC has been started, and the connection between cumulus and the console is established, resuming the reading of the data at the start time of the PC. The lapse of time between the cumulus stop and restart, no data collected, whereas they should have been stored in the datalogger.

water01
Posts: 1535
Joined: Sat 13 Aug 2011 9:33 am
Weather Station: WH1081
Operating System: Windows 7 64bit HP SP1
Location: Somewhere in the USA
Contact:

Re: DataloggerIP Vantage and Cumulus

Post by water01 » Fri 26 Apr 2019 1:50 am

Then I can only suggest as per the wiki you restore a backup of the complete set of files from a date prior to the crash and see if that solves the problem.

Post Reply