CumulusMX Fail on UTC time - System.OverflowException - DoSunriseAndSunset
Posted: Mon 15 Apr 2019 8:15 pm
Hi All
I'm getting the following errors when running cumulusMX when i have my PC time set to UTC. You can see that when cumulus does DoSunriseAndSunset when i have my time set to UTC it fails. I did this around 4 pm toronto time. You can see in the first instance it starts ok but in the second it fails at UTC time 20:00 .
I've done this on two separate PCs now. I couldn't figure out the issue on the first PC so i swtiched to another. Then when i switched to UTC the error returned.
Any ideas? I haven't set match station time to PC, should i?
thanks
orfeo
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:00:00
Connected to stationAnother update - i just installed it on a second PC and had the
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
[ERROR] FATAL UNHANDLED EXCEPTION: System.OverflowException: Number overflow.
at System.Convert.ToInt32 (Double value) [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus.DoSunriseAndSunset () [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus..ctor (Int32 HTTPport, Int32 WSport) [0x00000] in <filenamDoSunriseAndSunsete unknown>:0
at CumulusMX.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:05:00
Connected to stationexact same problem. This would seem to
Your console firmware version does not support LOOP2. Consider disabling it in Cumulus.ini
Downloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
2019-04-15 4:03:14 PM
Type Ctrl-C to terminate
Downloading Archive Data
Normal running
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
[ERROR] FATAL UNHANDLED EXCEPTION: System.OverflowException: Number overflow.
at System.Convert.ToInt32 (Double value) [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus.DoSunriseAndSunset () [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus..ctor (Int32 HTTPport, Int32 WSport) [0x00000] in <filenamDoSunriseAndSunsete unknown>:0
at CumulusMX.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:05:00
Connected to station
Your console firmware version does not support LOOP2. Consider disabling it in Cumulus.ini
Downloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
2019-04-15 4:09:06 PM
Type Ctrl-C to terminate
I'm getting the following errors when running cumulusMX when i have my PC time set to UTC. You can see that when cumulus does DoSunriseAndSunset when i have my time set to UTC it fails. I did this around 4 pm toronto time. You can see in the first instance it starts ok but in the second it fails at UTC time 20:00 .
I've done this on two separate PCs now. I couldn't figure out the issue on the first PC so i swtiched to another. Then when i switched to UTC the error returned.
Any ideas? I haven't set match station time to PC, should i?
thanks
orfeo
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:00:00
Connected to stationAnother update - i just installed it on a second PC and had the
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
[ERROR] FATAL UNHANDLED EXCEPTION: System.OverflowException: Number overflow.
at System.Convert.ToInt32 (Double value) [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus.DoSunriseAndSunset () [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus..ctor (Int32 HTTPport, Int32 WSport) [0x00000] in <filenamDoSunriseAndSunsete unknown>:0
at CumulusMX.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:05:00
Connected to stationexact same problem. This would seem to
Your console firmware version does not support LOOP2. Consider disabling it in Cumulus.ini
Downloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
2019-04-15 4:03:14 PM
Type Ctrl-C to terminate
Downloading Archive Data
Normal running
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
[ERROR] FATAL UNHANDLED EXCEPTION: System.OverflowException: Number overflow.
at System.Convert.ToInt32 (Double value) [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus.DoSunriseAndSunset () [0x00000] in <filename unknown>:0
at CumulusMX.Cumulus..ctor (Int32 HTTPport, Int32 WSport) [0x00000] in <filenamDoSunriseAndSunsete unknown>:0
at CumulusMX.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
tao@tao-Latitude-E6420 ~/Documents/CumulusMX $ sudo mono CumulusMX.exe
Current culture: English (Canada)
Serial: C0994DC86D3DD1DDA786052618A60638
Cumulus MX v.3.0.0 build 3048
Today.ini = data/today.ini
Last update=2019-04-15T16:05:00
Connected to station
Your console firmware version does not support LOOP2. Consider disabling it in Cumulus.ini
Downloading Archive Data
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
2019-04-15 4:09:06 PM
Type Ctrl-C to terminate