Page 1 of 1

CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Tue 30 Jan 2018 9:06 pm
by paologambal
I installed CumulusMx dist.3043 but when I start it with mono not work.I attach log of MXdiags.Thanks.

Re: CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Tue 30 Jan 2018 9:17 pm
by steve
You have told it to use port 8002 for the web interface, so when it tries to open the web socket port, which is 8002, the system correctly says that port is already in use.

Re: CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Wed 31 Jan 2018 11:53 am
by paologambal
I apologize, but I cannot understand:as never part the program of CumulusMx with mono before you connect to the web?What am I doing wrong?After CumulusMx launched is right that to see the station on the monitor should I charge http://IP_del_raspberry:8002?.I attack file txt when I launch CumulusMX.Thanks for the collaboration.

Re: CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Wed 31 Jan 2018 12:39 pm
by steve
You are telling Cumulus to use port 8002 for its user interface when you start it, by supplying the port parameter

Command line: /home/pi/Scaricati/CumulusMX/CumulusMX.exe -port 8002

I have no idea why you are doing this, it can never work because port 8002 is used for the gauges etc to read their data using the ‘web sockets’ protocol.

The default port for the user interface is 8998 and this rarely needs to be changed.

Re: CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Wed 31 Jan 2018 9:31 pm
by paologambal
I apologize again; I can explain myself better: I used the port 8002 because i can't get with the port 8998 as from txt file that I enclose.
Ports on my router are loaded.What can I do?.Thanks again .

Re: CumulusMX dist.3043 mono 4.6.2.7+dfsg-1 no work

Posted: Wed 31 Jan 2018 9:41 pm
by steve
If you can’t get the MX display to appear in a browser on a PC on the same network using the IP address of the raspberry pi and port 8998 (I.e. http://a.b.c.d:8998) then you have some kind of firewall issue and using a different port number won’t help and you have just been wasting your time and mine.