Guys,
I've observed that today it happened again: Cumulus started sending "0°C" readings to WUnder. Last time it required a reset on the AW2080 unit.
http://www.wunderground.com/personal-we ... =ISPJACAR3
As I'm not at home now, it will keep sending bad data along the day...
PS: Ignore barometer data, I have another problem to solve with this.
But, my question is much more on CumulusMX. I recall that 1.9.4 had some algorithms that would reset the application or ignore these bad points (not sending then to WUnder). Is this present on MX version too?
My best regards,
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
FineOffset reading 0°C
Moderator: mcrossley
-
- Posts: 7
- Joined: Thu 28 Mar 2013 5:29 pm
- Weather Station: AW WS-2080
- Operating System: Lubuntu
- Location: Brazil
- steve
- Cumulus Author
- Posts: 26702
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: FineOffset reading 0°C
Cumulus MX has the same 'spike removal' settings as Cumulus 1.9.4. But I think you have an issue with your station other than the usual Fine Offset spikes, looking at your readings. The spike removal settings aren't really designed to overcome that.
Steve