Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.1.2 build 3055 - 4 November 2019.
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

See the Wiki for downloading either version.

CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.4

Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.

Moderator: mcrossley

jank
Posts: 326
Joined: Sat 13 Jun 2015 5:57 pm
Weather Station: weatherstation
Operating System: Debian Wheezy
Location: Germany

Re: CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.3

Post by jank » Wed 06 Nov 2019 8:21 am

Hello Billy

in my post earlier this year I asked you if you really need IPv6 or if you could disable it on your device and you told me that you are okay to disable it.
Please keep in mind, ipv6 on the RaspberryPi can not be permanentely disabled, so it must be disabled on every boot ...as far as I remember

But HansR would like to use IPv6 on his device to be prepared for the far future, for a life with ipv6.
Anyway, I have a new version in place which is hiding the ipv6 information in the output but not presuppose a disabled ipv6 on your device.

If I have time today, I will put the new version on the first page of this thread (as alwways)

btw: If you followed my suggestiont earlier this year to disable ipv6:

nano /etc/sysctl.d/01-disable-ipv6.conf to create an empty file and insert this line:
net.ipv6.conf.all.disable_ipv6 = 1
Save.
This will permanently disable IPv6 (If you need IPv6 sometime in the future, remove this file......


...you can now delete this file to enable ipv6 in the hope, that my changes work :-)

thank you
Jan
Want to see your Station values on SSH? Cumulusnow http://sandaysoft.com/forum/viewtopic.php?f=27&t=14062
Want a Start|Stop|Restart Script for CumulusMX on RaspberryPi? cumulusmx.sh http://sandaysoft.com/forum/viewtopic.php?f=27&t=13767

slashmusic
Posts: 221
Joined: Sun 10 Jan 2010 10:43 am
Weather Station: WS2350
Operating System: Raspberry Pi2 - Debian
Location: Germany
Contact:

Re: CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.4

Post by slashmusic » Thu 07 Nov 2019 3:23 pm

Version 2.5.5.4 is available [07.11.2019]

* Fixed an output error on devices where ipv6 is enabled. (IPv6 information will now be ignored
* Fixed an output error when checking CumulusMX Version information in status page
* Syntax check of all output messages (thank you goes to Experimentor

the update is available in the first post of this thread
Image

richard_newberry
Posts: 304
Joined: Tue 12 Apr 2011 10:23 pm
Weather Station: Watson W-8186
Operating System: Debian Buster
Location: Leicester
Contact:

Re: CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.4

Post by richard_newberry » Sun 17 Nov 2019 10:41 pm

Hi,

Can anyone help me what error messages are these since I updated to V2.5.5.4.

nc: invalid option -- '4'
nc -h for help
./cumulusmx.sh: line 636: [: integer expression expected
<<<<<<<<< Cumulus Status at Sun 17 Nov 22:39:18 GMT 2019 >>>>>>>>

Thanks.
Desford Weather
http://www.desford-weather.co.uk
http://desford-weather.co.uk
Also on Desford weather underground.
Looking forward to cumulus on Linux platform it'll rock!!

jank
Posts: 326
Joined: Sat 13 Jun 2015 5:57 pm
Weather Station: weatherstation
Operating System: Debian Wheezy
Location: Germany

Re: CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.4

Post by jank » Mon 18 Nov 2019 11:18 am

Hello Richard

Your error: nc: invalid option -- '4'

nc = netcat and I changed nothing at this line (please check line 247 for this code): CHECKPORT=$(nc -4 -z $IPADDRESS $PORT;echo $?)

Can you also please run this command on your pi:

nc -4 -z [YOUR IP ADDRESS] [TCP_PORT];echo $? (replace [YOUR IP ADDRESS] with the IP of the RaspberryPi and [TCP_PORT] with the TCP PPort used for CumulusMX

you should get a 0 as a result. If you use any other port, your should get a 1 as theresult

Exmaple:
pi@cumulus:/CumulusMX $ nc -4 -z 192.168.193.6 9999;echo $?
0


What debian version are you using on your pi ?

kind regards
Jan
Want to see your Station values on SSH? Cumulusnow http://sandaysoft.com/forum/viewtopic.php?f=27&t=14062
Want a Start|Stop|Restart Script for CumulusMX on RaspberryPi? cumulusmx.sh http://sandaysoft.com/forum/viewtopic.php?f=27&t=13767

richard_newberry
Posts: 304
Joined: Tue 12 Apr 2011 10:23 pm
Weather Station: Watson W-8186
Operating System: Debian Buster
Location: Leicester
Contact:

Re: CumulusMX - RaspberyPi - Start|Stop|Restart Script V2.5.5.4

Post by richard_newberry » Mon 18 Nov 2019 12:12 pm

I took the 4 out and error gone away i just got this error now.

./cumulusmx.sh: line 636: [: integer expression expected

Using Debian Buster (10)
Desford Weather
http://www.desford-weather.co.uk
http://desford-weather.co.uk
Also on Desford weather underground.
Looking forward to cumulus on Linux platform it'll rock!!

Post Reply