ftp not uploading

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 2:16 pm

Steve
all ftp was stooped uploading
I got every back except for the realtime up load by delete the temp file in mx web folder
im not sure where to check
Beau

Post by **steve** » Wed 21 Jan 2015 2:37 pm

Are there any errors in the MX diags file?

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 2:47 pm

Steve
I do bo see any thing here it is
Beau

Post by **steve** » Wed 21 Jan 2015 2:54 pm

Nothing in there, so perhaps it was an ftp problem. I know that some kinds of connection issues can cause realtime ftp to stop and require MX to be restarted.

Currently to turn on ftp logging, you have to stop Cumulus and edit Cumulus.ini. Add a line

FTPlogging=1

to the [FTP site] section. Note that realtime and normal ftp are logged to the same file, ftplog.txt.

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 4:15 pm

Hi Steve,
stop changed ini restarted still no realtime

Post by **steve** » Wed 21 Jan 2015 4:24 pm

I can see your realtime files uploading, but they're uploading every ten minutes like your other files.

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 4:42 pm

Hi Steve,
these are my settings
Upload interval 5

Realtime interval 600000

Beau

Post by **steve** » Wed 21 Jan 2015 4:44 pm

n9mfk wrote:Realtime interval 600000

So it's working correctly, uploading every 10 minutes.

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 4:57 pm

I am confused
in cumulus 1 i used 60 sec
i used that ini for mx an it set it to 600000

so what would be 1 min in mx
thanks beau

mcrossley · Post by **mcrossley** » Wed 21 Jan 2015 4:58 pm

60 * 1000 = 60 000. Not 600 000

Post by **water01** » Wed 21 Jan 2015 5:00 pm

One too many zeros that is 10 minutes as Steve said.

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 5:31 pm

I tried 60000 but it dpes not seem to change
Beau

Post by **steve** » Wed 21 Jan 2015 5:35 pm

You changed it to 60000 using the internet settings screen, then restarted Cumulus, and it is still using 600000? That's very odd. Did the Cumulus.ini file not get updated for some reason?

n9mfk · Post by **n9mfk** » Wed 21 Jan 2015 5:50 pm

Steve after a restart it changed
so when a setting like that changed it must need a restart
Thanks Beau

PaulMy · Post by **PaulMy** » Wed 21 Jan 2015 8:17 pm

Again, from the FAQ/Known issues
•Some setting changes don't take effect until you restart Cumulus MX

Paul

Cumulus Support

ftp not uploading

ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading

Re: ftp not uploading