Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.2.4 build 3060 - 10 December 2019.
    Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

    See the Wiki for downloading either version.

    guagesT.htm

    Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.

    Moderator: mcrossley

    Post Reply
    GiveToLive
    Posts: 18
    Joined: Tue 26 Mar 2013 5:49 pm
    Weather Station: Davis Vantage Pro2
    Operating System: Win 7
    Location: Alvarado, TX USA
    Contact:

    guagesT.htm

    Post by GiveToLive » Wed 07 Jan 2015 2:55 am

    A couple of issues:

    The 3003 version of gaugesT.htm is really messed up. Reverted back to the 3001 version which works OK.

    Cumulus.ini has two FTP sections. The first one seems to have the correct information for "realtime.txt". The second one though seems to be the one MX is using. This second FTP section at the end of the ini file is where RealtimeTxtFTP must be manually set to 1 instead of 0. But any change that requires MX to rewrite the ini file will reset RealtimeTxtFTP=0.
    Glenn

    To give is to live.

    www.give2live.info/Weather/

    User avatar
    steve
    Cumulus Author
    Posts: 26717
    Joined: Mon 02 Jun 2008 6:49 pm
    Weather Station: None
    Operating System: None
    Location: Vienne, France
    Contact:

    Re: guagesT.htm

    Post by steve » Wed 07 Jan 2015 8:14 am

    GiveToLive wrote:The 3003 version of gaugesT.htm is really messed up.
    It's the same as the one I'm using here - http://sanday.org.uk/weather/gauges.htm - and seems to work for me.
    Cumulus.ini has two FTP sections.
    Does one have the word 'site' in [FTP site] starting with a lower case 's' and one with an upper case 'S'? This was the purpose of my post here - http://sandaysoft.com/forum/viewtopic.php?f=4&t=12881. Everyone who replied had a lower case 's', that's the one that MX uses.
    This second FTP section at the end of the ini file is where RealtimeTxtFTP must be manually set to 1 instead of 0. But any change that requires MX to rewrite the ini file will reset RealtimeTxtFTP=0.
    This in the list of known issues.
    Steve

    Post Reply