Build 3002 working

[PaulMy]

I have updated, and seems fine for the v.3002 "fixed" items I can check for Davis VP2 -
Logging interval: data now saved every 10 minutes (as in my settings). Looks like the first entry from data logger is missing the same as in Cumulus 1 (i.e. 13:30 13:50 14:00 14:10) which if I recall correctly is a Davis issue.

Web update:
realtime.txt appears correct on my webserver;
gauges (new gauges-ss is missing the trends graph but I think that is noted in the FAQ, and the Windrose gauge not fully showing;
now, today, yesterday, monthlyrecord, record, thismonth, all ok and trends not displaying data (as noted in FAQ)

Gauges: units are shown correctly.

I have not seen any "token error".

Paul

[steve]

Looks like the first entry from data logger is missing the same as in Cumulus 1 (i.e. 13:30 13:50 14:00 14:10) which if I recall correctly is a Davis issue.

The most recent logger entry never gets downloaded with the Davis DLL, but that shouldn't an issue with MX. I assume you started it up some time between 13:30 and 13:50? Could you upload the MXdiags file so I can have a look, please?

To get the graphs now you would need to use the new trends page.

[PaulMy]

MXdiags zip attached.
Yes I restarted it shortly after 13:30

I may have spoken to soon on *** token error *** as they still appear, and watching the DOS screen during the 5 minute web update at least 2 new lines were written at that time and then nothing, likely until the next web update.

Paul

[steve]

There don't seem to be any files from today in that zip file?

[PaulMy]

I think 2 files are now included

Paul

[steve]

The missing logger entry is because the console didn't have the entry that Cumulus asked for, so it did the thing where it sends the entire contents of the logger. This takes some time so an entry in the logs is missed. Could your console clock be a bit behind the PC clock?

The 'token error' is because you have some invalid web tags, e.g

<td><#RecentOutsideTemp d=3 h= m=1></td>
<td><#RecentDewPoint d=3 h= m=1></td>
<td><#RecentHumidity d=3 h= m=1></td>
<td><#RecentWindSpeed d=3 h= m=1></td>

The missing value for the hour parameter is the problem, a value should be supplied. You probably get away with it in Cumulus 1, but strictly speaking it's invalid. I note that you have some date/time format strings on some of your other web tags; these won't work properly in MX without modification.

[PaulMy]

Thanks Steve.
Since I use the Envoy to connect to the weather computer I can't check the time, only from WL. I stopped CumulusMX to run WL and the time seemed correct (it only goes by minutes, not seconds) so immediately after a computer clock to a minute change I matched WL. Then stopped WL and restarted CumulusMX and then data appeared in a couple of seconds or so. So seems ok now.

I wasn't aware of the missing "h" parameter in the obs.htm script and will look at that. I had read your comment about the date/time format but hadn't gotten to fix that. Will try that now.

Paul

[PaulMy]

Sorry, I missed giving an update on the first data from Davis logger not being downloaded. After fixing the missing "h= " and on restart all logger entries are downloaded. Have checked again after a couple of other restarts and all is good.

Thanks,
Paul