Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.6.6 (build 3082) - 1 June 2020 (please see important announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of the NOAA report and Snow Index drop-down menus to 2030)

See the Wiki to download the software or click on the Downloads link in the Forum Banner.

Problem on send data external services

From build 3044 the development baton passed to Mark Crossley. Mark has been responsible for all the Builds since. He has made the code available on GitHub. It is Mark's hope that others will join in this development, but at the very least he welcomes your ideas for future developments (see Cumulus MX Development suggestions).

Moderator: mcrossley

Post Reply
marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Problem on send data external services

Post by marco.morgia »

Good evening,

it's since the4 of October that CumulusMx don't send data to

PWS
WeatherCloud
Awekas

only WaetherUnderground works.
On my log I can't see anything about errors

It's all enabled and until this date (4 october) all works fine. I've have the last version of Cumulus MX 3.0.2 b3052.

It's only my problem?

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

Make sure you have switched on debug logging, leave it running for a couple of upload intervals, then post the zipped up MXdiags folder.

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

Here's my log file.


nothing seems to be sent, even if everything is correctly configured
You do not have the required permissions to view the files attached to this post.

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

It doesn't have debug logging enabled.

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

Sorry, in attachement the correct file
You do not have the required permissions to view the files attached to this post.

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

Hmm it isn't logging anything about web uploads. It does seem to have some issues talking to the station from time to time.

I'm not very familiar with the WMR100 code, I'll have to take a look at what it is doing...

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

To give you some additional info, every night at 1 AM I make a reboot of the raspberry. I've installed the version 3 of Cumulus on July and until the 4 Oct all works fine. Until this date, every time that I've enabled debug logging, on log i had seen the connections to these external services.

Monday I've tried to install the new version of cumulus but the problem persist.

I'm a C# programmer, if you want I make some test to understand what goes wrong.

This weekend I make a clean installation of raspberry.

Another info, i have a raspberry pi zero.

Thanks for help

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

Just to be clear, when it stopped working on 4th October, had you installed a new version of MX?

Did anything else change, like an apt upgrade of mono?

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

The new version was installed on 14 of october.

Every 3/4 days I make an update (apt-get update) and upgrade of the system.

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

Can you also send your Cumulus.ini file please?
NOTE: It contains usernames and passwords - please remove them before posting the file.

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

Here the file
You do not have the required permissions to view the files attached to this post.

marco.morgia
Posts: 8
Joined: Wed 24 Jul 2013 3:07 pm
Weather Station: Oregon WMR88
Operating System: Raspbian
Location: Anagni

Re: Problem on send data external services

Post by marco.morgia »

Maybe I've undenstod the problem.

One of my sensor was out due to battery outage.
I have changed the battery of sensor and now all the data were sent correctly to external provider.

I continue to monitor the situation and give you a feedback in next days.

The image in attachment describe the problem. From 4 oct the wind sensor have a stop
Cattura.JPG
You do not have the required permissions to view the files attached to this post.

User avatar
mcrossley
Posts: 6490
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Problem on send data external services

Post by mcrossley »

OK, I couldn't see anything from the diags you provided it just wasn't sending anything, but yes if a core sensor is unavailable then CMX will not function correctly unless you set the option NoSensorCheck=1 to the config file

Post Reply