Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Help needed
Moderator: saratogaWX
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Help needed
Hi! I installed this template last evening / night. Can someone help me, how can I get those trends and reports to work? What`s wrong? I have tried to get them visible, but they just don`t work.. I really need advice in this.... http://www.kapo511.net/index.php
- nitrx
- Posts: 1297
- Joined: Sun 13 Dec 2009 1:21 pm
- Weather Station: WH1080
- Operating System: Windows 10
- Location: Apeldoorn The Netherlands
- Contact:
Re: Help needed
Are you running the latest beta of Cumulus the site says Cumulus (1.9.0-b958) and your banner suggest the latest version strange ..kapo wrote:Hi! I installed this template last evening / night. Can someone help me, how can I get those trends and reports to work? What`s wrong? I have tried to get them visible, but they just don`t work.. I really need advice in this.... http://www.kapo511.net/index.php
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
Yes. And same banner in one finnish forum goes to the saratoga template. And I watched Cumulus about: Version 1.9.3 Build 1057? And that link above goes too to the saratoga template? What have I done????nitrx wrote:Are you running the latest beta of Cumulus the site says Cumulus (1.9.0-b958) and your banner suggest the latest version strange ..kapo wrote:Hi! I installed this template last evening / night. Can someone help me, how can I get those trends and reports to work? What`s wrong? I have tried to get them visible, but they just don`t work.. I really need advice in this.... http://www.kapo511.net/index.php
- nitrx
- Posts: 1297
- Joined: Sun 13 Dec 2009 1:21 pm
- Weather Station: WH1080
- Operating System: Windows 10
- Location: Apeldoorn The Netherlands
- Contact:
Re: Help needed
I'm not sure about this Ken know more about the template but it seems your tags aren't compatible or processed to the website you can see the values of your tags here these values are used by the templates. http://www.kapo511.net/CUtags.php?sce=dump
I think you've uploaded the example tags from the template but not proccessing your own tags local and upload them by cumulus. The ajax dashboard is processed by the realtimte.txt file this works fine as far as I can see.
I think you've uploaded the example tags from the template but not proccessing your own tags local and upload them by cumulus. The ajax dashboard is processed by the realtimte.txt file this works fine as far as I can see.
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
And what should I do (wrong) next?nitrx wrote:I'm not sure about this Ken know more about the template but it seems your tags aren't compatible or processed to the website you can see the values of your tags here these values are used by the templates. http://www.kapo511.net/CUtags.php?sce=dump
I think you've uploaded the example tags from the template but not proccessing your own tags local and upload them by cumulus. The ajax dashboard is processed by the realtimte.txt file this works fine as far as I can see.
- nitrx
- Posts: 1297
- Joined: Sun 13 Dec 2009 1:21 pm
- Weather Station: WH1080
- Operating System: Windows 10
- Location: Apeldoorn The Netherlands
- Contact:
Re: Help needed
Use the latest CUtags.txt let it process by cumumulus and ftp it by cumumulus to your webdirectory as CUtags.php . This should do the job.
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
Yep! Now it seems that trends are working. NOAA reports aren`t still working.... But A little bit help I have had. Tank You about it. Have You any suggestions about those NOAA reports to get visible???nitrx wrote:Use the latest CUtags.txt let it process by cumumulus and ftp it by cumumulus to your webdirectory as CUtags.php . This should do the job.
- nitrx
- Posts: 1297
- Joined: Sun 13 Dec 2009 1:21 pm
- Weather Station: WH1080
- Operating System: Windows 10
- Location: Apeldoorn The Netherlands
- Contact:
Re: Help needed
I don't use that template but http://www.kapo511.net/Reports/ is an empty directory if there are no reports on the server it won't work.
- saratogaWX
- Posts: 1197
- Joined: Wed 06 May 2009 5:02 am
- Weather Station: Davis Vantage Pro Plus
- Operating System: Windows 10 Professional
- Location: Saratoga, CA, USA
- Contact:
Re: Help needed
Kapo,
You may have to wait until after midnight local time for the Reports/ directory to have contents. Cumulus does the NOAA-style reports once daily after midnight.
Best regards,
Ken
You may have to wait until after midnight local time for the Reports/ directory to have contents. Cumulus does the NOAA-style reports once daily after midnight.
Best regards,
Ken
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
O.k.saratogaWX wrote:Kapo,
You may have to wait until after midnight local time for the Reports/ directory to have contents. Cumulus does the NOAA-style reports once daily after midnight.
Best regards,
Ken
And thanks to You. I`ll wait till tomorrow and watch then. I hope that I haven`t done something really bad to my directories, that they have corrupted... I`m really "handless" with these things.. But I`m learning a bit by bit I believe...
Best regards
Kapo
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Help needed
You have set the reports to be uploaded, on the NOAA setup screen in Cumulus, yes?
Steve
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
What a question! Ofcourse not!!! How do I do it?steve wrote:You have set the reports to be uploaded, on the NOAA setup screen in Cumulus, yes?
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Help needed
Go to Configuration -> NOAA setup. Tick 'Auto save after daily reset' and 'Auto FTP after auto save', and put the full path to your 'reports' directory on your ftp server in the 'FTP directory' box. Note that it doesn't use the FTP directory from the internet settings, you need to supply it here also (with 'Reports' on the end).
Steve
- saratogaWX
- Posts: 1197
- Joined: Wed 06 May 2009 5:02 am
- Weather Station: Davis Vantage Pro Plus
- Operating System: Windows 10 Professional
- Location: Saratoga, CA, USA
- Contact:
Re: Help needed
Thanks for that reminder Steve!
Kapo:
You can also do a bit more configuration on your site by visiting http://saratoga-weather.org/wxtemplates/find-metar.php , inserting your latitude/longitude and receive the closest METAR to your location to replace the Settings-weather.php entry of .. as it is right now, your conditions image/text is from MY nearby METAR (KSJC is in San Jose, CA, USA).
The same find-metar.php page produces the entries to use in the wxmetar.php page for you to replace the current contents of which are all for METAR near me with your own customized set.
Lastly, the Settings.php entry of should be replaced with the MeteoAlarm.eu URL for your location .. it is currently using the default of East Jutland, Denmark which is what is shipped with the defaults in the World template set.
I've added your site to the list of template sites too
Best regards,
Ken
Kapo:
You can also do a bit more configuration on your site by visiting http://saratoga-weather.org/wxtemplates/find-metar.php , inserting your latitude/longitude and receive the closest METAR to your location to replace the Settings-weather.php entry of
Code: Select all
$SITE['conditionsMETAR'] = 'KSJC'; // set to nearby METAR for current conditions icon/text
The same find-metar.php page produces the entries to use in the wxmetar.php page for you to replace the current contents of
Code: Select all
// Metar(ICAO) | Name of station | dist-mi | dist-km | direction |
'KSJC|San Jose, California, USA|9|14|NE|', // lat=37.3667,long=-121.9167, elev=24, dated=30-SEP-11
'KNUQ|Moffett Nas/Mtn, California, USA|9|14|N|', // lat=37.4000,long=-122.0500, elev=12, dated=30-SEP-11
'KPAO|Palo Alto, California, USA|14|23|NNW|', // lat=37.4667,long=-122.1167, elev=2, dated=30-SEP-11
'KRHV|San Jose/Reid, California, USA|12|19|ENE|', // lat=37.3167,long=-121.8167, elev=41, dated=30-SEP-11
'KOAK|Oakland, California, USA|31|50|NNW|', // lat=37.7000,long=-122.2167, elev=26, dated=30-SEP-11
'KSQL|San Carlos Airpo, California, USA|21|34|NW|', // lat=37.5167,long=-122.2500, elev=1, dated=30-SEP-11
'KSFO|San Francisco, California, USA|30|49|NW|', // lat=37.6167,long=-122.3667, elev=3, dated=30-SEP-11
'KE16|San Martin, California, USA|27|43|ESE|', // lat=37.0833,long=-121.6000, elev=86, dated=30-SEP-11
'KWVI|Watsonville, California, USA|27|44|SSE|', // lat=36.9333,long=-121.7833, elev=43, dated=30-SEP-11
'KHAF|Half Moon Bay, California, USA|31|50|WNW|', // lat=37.5167,long=-122.5000, elev=21, dated=30-SEP-11
'KHWD|Hayward, California, USA|28|44|N|', // lat=37.6667,long=-122.1167, elev=21, dated=30-SEP-11
'KLVK|Livermore, California, USA|31|51|NNE|', // lat=37.7000,long=-121.8167, elev=117, dated=30-SEP-11
// list generated Sun, 27-Nov-2011 9:01pm PST at http://saratoga-weather.org/wxtemplates/find-metar.php
Lastly, the Settings.php entry of
Code: Select all
$SITE['EUwarningURL'] = 'http://www.meteoalarm.eu/index3.php?area=DK004&day=0&lang=en_UK';
I've added your site to the list of template sites too
Best regards,
Ken
-
- Posts: 246
- Joined: Thu 03 Jan 2013 1:59 pm
- Weather Station: Davis VP2
- Operating System: Windows 10
- Location: Vihtavuori, Laukaa, Finland
Re: Help needed
Hello again...
Thanks for that big information. I made those changes in my site and.. unbelievebly they work!!! Meteoalarm and those stations nearby me.. But NOAA report dosen´t appear still?? What in a earth I should do..? And next problem is that I can´t add ssgauges link in that navigation bar left. I added the link in menubar :
<li><a href="wxssgauges.php" title="Gauges">Gauges</a></li>, but it dosen`t appear in homepge navigation left? I have a folder : "ssg" in Public_html and the scripts in that folder. Those gauges worked in my past template, but what next? I am asking a very polite, that you could be patient with me...I don´t want to disturb anyone too much...
This template is the template that I want to work perfectly with my station.
Thanks for that big information. I made those changes in my site and.. unbelievebly they work!!! Meteoalarm and those stations nearby me.. But NOAA report dosen´t appear still?? What in a earth I should do..? And next problem is that I can´t add ssgauges link in that navigation bar left. I added the link in menubar :
<li><a href="wxssgauges.php" title="Gauges">Gauges</a></li>, but it dosen`t appear in homepge navigation left? I have a folder : "ssg" in Public_html and the scripts in that folder. Those gauges worked in my past template, but what next? I am asking a very polite, that you could be patient with me...I don´t want to disturb anyone too much...
This template is the template that I want to work perfectly with my station.