Welcome to the Cumulus Support forum.
Latest Cumulus MX release 3.17.0 (build 3184)
- 23 May 2022
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are interested in supporting Cumulus then maybe you would like to contribute to the maintenance of the Wiki
? This need not take hours of your time - just a half hour here and there can make a big difference, particularly if many people are doing this. Any contributions are very welcome, whether they involve new content or editing of existing content. It will be very helpful to current and future users of Cumulus software if the Wiki is kept well-maintained and current. If you are interested then please contact forum user saratogaWX
and ask for a Wiki account.
Discussion of this sensor and its uses
- Posts: 838
- Joined: Sun 03 Jul 2011 6:23 pm
- Weather Station: Davis VP2 Plus - 24hr FARS
- Operating System: Windows 10 - 64 bit
- Location: Eastleigh, Hampshire, UK
I didn't want to jump on an existing thread, I had several emails with Ben @ Hydreon today. One of which was the accuracy and possible future of the RG11. Here's the reply:
We are always gathering data to improve the algorithm for future releases. But it will unlikely to be as accurate as a properly maintained tipping bucket. There are so many different conditions that that the RG-11 will pick up that that Tipping bucket will not. Also, since the tipping bucket is a physical measurement of rain, its tough to get as accurate as that.
But, with the current software, the RG-11 is very close. For example, the past data point collections for a TB vs the RG-11 are as follows. These were taken over a rainfall ans then reset.
Hope this helps.
Our manual says to do annual applications of Rain-X for better accuracy, but even more will keep it more accurate.
And here's the table but in mm (if I converted it correctly).
You do not have the required permissions to view the files attached to this post.