Temp Min/Max/Avg

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 9:57 am

I've only just noticed that the Temperature graph showing Min/Max/Avg is blank. I'm not sure how long it has been like this, but it was certainly OK two or three weeks ago when I last looked at the graphs (been v busy!). All other data and graphs seem to be OK. Assume its to do with a recent Beta update. Any thoughts?

Post by **steve** » Wed 21 Sep 2011 11:02 am

It may have been unable to read dayfile.txt at start up due to a problem in that file; but normally it would flash the error light for that. Your daily rain graph would seem to confirm that. If you zip up the diags folder and attach it, I'll take a look.

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 11:22 am

steve wrote:It may have been unable to read dayfile.txt at start up due to a problem in that file; but normally it would flash the error light for that. Your daily rain graph would seem to confirm that. If you zip up the diags folder and attach it, I'll take a look.

As ever, many thanks Steve! Attached is the zipped up diags folder.

Many thanks once again!
Steve

Post by **steve** » Wed 21 Sep 2011 11:54 am

I can't see anything obviously wrong, it should create the daily charts when it starts up, but you only seem to have the one day plotted. Have you changed the plotting period? What value is shown in the display settings for 'daily chart period'?

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 11:59 am

steve wrote:I can't see anything obviously wrong, it should create the daily charts when it starts up, but you only seem to have the one day plotted. Have you changed the plotting period? What value is shown in the display settings for 'daily chart period'?

hi Steve,
I did change it to 168 hours (1 week) some time ago - is that causing the problem to you think? If so what do you suggest I set it to?

Best wishes and thanks again!

Steve

Post by **steve** » Wed 21 Sep 2011 12:23 pm

sjukmidlands wrote:I did change it to 168 hours (1 week) some time ago

That's not the daily chart period; it shouldn't affect the daily charts. What do you have those set to?

Pomona - pomona_2011-09-21_13-22-05.png

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 12:27 pm

steve wrote:
sjukmidlands wrote:I did change it to 168 hours (1 week) some time ago
That's not the daily chart period; it shouldn't affect the daily charts. What do you have those set to?

Pomona - pomona_2011-09-21_13-22-05.png

Ah right, the Daily Chart period is set to 1 day, presumably that's the mistake?

Steve

Post by **steve** » Wed 21 Sep 2011 12:39 pm

sjukmidlands wrote:Ah right, the Daily Chart period is set to 1 day, presumably that's the mistake?

Well, one day is what it's displaying. It defaults to 31, but gets set to 1 if you change it to something less than 1.

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 12:43 pm

steve wrote:
sjukmidlands wrote:Ah right, the Daily Chart period is set to 1 day, presumably that's the mistake?
Well, one day is what it's displaying. It defaults to 31, but gets set to 1 if you change it to something less than 1.

I've set it back to 24hours and 31 days (respectively) as shown in your screencap. Hopefully that will fix it? Thanks for your help!
Steve

sjukmidlands · Post by **sjukmidlands** » Wed 21 Sep 2011 5:37 pm

Thanks for all your help today Steve, all sorted and working now, as you'll see from the website.

Best wishes,
Steve

Mapantz · Post by **Mapantz** » Sat 17 Dec 2011 12:02 pm

Hi, i've recently converted over to Cumulus and i have just noticed the same problem.
I installed it roughly 24hrs ago, and min/max/average temp graph is blank. Any ideas?

Regards.

Post by **steve** » Sat 17 Dec 2011 12:05 pm

Mapantz wrote:I installed it roughly 24hrs ago, and min/max/average temp graph is blank. Any ideas?

http://wiki.sandaysoft.com/a/FAQ#My_tem ... h_is_empty

Mapantz · Post by **Mapantz** » Sat 17 Dec 2011 12:18 pm

steve wrote: http://wiki.sandaysoft.com/a/FAQ#My_tem ... h_is_empty

Thanking you kindly!

I'll give it a few days then.
PS: Great work on this software.

Cumulus Support

Temp Min/Max/Avg

Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg

Re: Temp Min/Max/Avg