Yesterday we had a high wind gust but 1.9.0 showed it as a record (45.0) but 1.9.1 did not record it, but an old one. So, I looked at the dayfiles for each instance of Cumulus (never run simultaneously) and found many, very random differences inthe data, not just the Wind Gust on 4 Feb.
I first installed 1.9.1 on 1st Dec, so all previous data is inherited from the 1.9.0 dayfile - so it is only past that date that there are these random differences - I can't understand why. Any ideas? I hadn't checked before, until this (Wind Gust) record difference appeared.
The 2 dayfile.txt files are attached - it's clear which is 1.9.1 as the more recent line data contains more items, but the 1st listed should be 1.9.0.
Thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Dayfile - Random differences between 1.9.0 & 1.9.1
-
- Posts: 12
- Joined: Sun 03 Jan 2010 1:58 pm
- Weather Station: Fine Offset WH1080
- Operating System: XP SP3 & Raspberry Pi
- Location: Bredfield, Woodbridge, UK
- Contact:
Dayfile - Random differences between 1.9.0 & 1.9.1
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Dayfile - Random differences between 1.9.0 & 1.9.1
Unless you are running them simultaneously (which you can't, as you realise), then they will never show exactly the same data. One is presumably using live data, so the samples are every 48 seconds, and the other is presumably using data from the logger, so its samples are every few minutes. You would get the same differences running two copies of 1.9.0.
Wind gusts in particular will tend to show this up.
Wind gusts in particular will tend to show this up.
Steve