view-gauge.js - not edited by Cumulus 1.9.4
Posted: Wed 23 Nov 2016 3:22 pm
Hello!
sorry for my bad English.
I recently run a weather station "WS1080 Fine Offset" and Cumulus 1.9.4 on a Windows 7 PC.
Now I have downloaded and edited the templates "weatherconsole and gauges" from this topic - https://cumulus.hosiene.co.uk/viewtopic.php?t=4357
In the file Gauges is a file called view-gauges.js and according to Readme.txt I should do the following:
>>>- Locate the view-gauges.js file in the package.
Put that file in your Cumulus DATA folder.
- In Cumulus program, goto Configuration -> Internet -> Files
In that screen use an empty row to click on BROWSE.
Browse to the cumulus program, data folder and click on the file you just put there (view-gauge.js)
After that in the remote filenames, type the path to the cumulus folder and view-gauge.js
Must be something like: /public_html/cumulus/view-gauge.js
Check the process and ftp checkbox and dont forget to click on OK (bottom of page)<<<
So I did it, but Cumulus loads a blank file on the server and indicates that the line 16 is too long.
Then I split the line on a normal screen width. Once I tried only a simple line break with the Enter key, and once I have set "/" after each line.
Now Cumulus loads the file unchanged on the server and I am not able to supply my page with current data. The displayed data in the small thermometers, the barometer and the cloud base are only the original data from the original file
www.modellclub-nauders.at/wetter/gauges.php
I have no idea what I could do. Please help me!
sorry for my bad English.
I recently run a weather station "WS1080 Fine Offset" and Cumulus 1.9.4 on a Windows 7 PC.
Now I have downloaded and edited the templates "weatherconsole and gauges" from this topic - https://cumulus.hosiene.co.uk/viewtopic.php?t=4357
In the file Gauges is a file called view-gauges.js and according to Readme.txt I should do the following:
>>>- Locate the view-gauges.js file in the package.
Put that file in your Cumulus DATA folder.
- In Cumulus program, goto Configuration -> Internet -> Files
In that screen use an empty row to click on BROWSE.
Browse to the cumulus program, data folder and click on the file you just put there (view-gauge.js)
After that in the remote filenames, type the path to the cumulus folder and view-gauge.js
Must be something like: /public_html/cumulus/view-gauge.js
Check the process and ftp checkbox and dont forget to click on OK (bottom of page)<<<
So I did it, but Cumulus loads a blank file on the server and indicates that the line 16 is too long.
Then I split the line on a normal screen width. Once I tried only a simple line break with the Enter key, and once I have set "/" after each line.
Now Cumulus loads the file unchanged on the server and I am not able to supply my page with current data. The displayed data in the small thermometers, the barometer and the cloud base are only the original data from the original file
www.modellclub-nauders.at/wetter/gauges.php
I have no idea what I could do. Please help me!