Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

RFXcom 433

Discussion and support for 3rd-party (non-Sandaysoft) tools for Cumulus
Post Reply
vincenttor
Posts: 7
Joined: Mon 14 Oct 2013 5:08 pm
Weather Station: WMRS200
Operating System: Windows 7
Location: Netherlands

RFXcom 433

Post by vincenttor »

It has been a while ago that i have posted.
As i have had allot of problems with the receiving of my sensors i decided to ditch the WMR200 from Oregon junktific.
I have bought a RFXcom433 TR/RX device and it works allot better , also using this for controller some switches for my domotica system.

Now i was wondering if there is going to be any support in the software for the RFXcom receiver ?

www.rfxcom.com is the developer.
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: RFXcom 433

Post by steve »

vincenttor wrote:Now i was wondering if there is going to be any support in the software for the RFXcom receiver ?
If you mean Cumulus, then it's unlikely, I'm afraid. But my current conditions for considering adding a new station are in the FAQ ;)
Steve
vincenttor
Posts: 7
Joined: Mon 14 Oct 2013 5:08 pm
Weather Station: WMRS200
Operating System: Windows 7
Location: Netherlands

Re: RFXcom 433

Post by vincenttor »

Will check that Steve, and indeed i was mentioning support into cumulus.
I might overlooked the Faq on that.
srry
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: RFXcom 433

Post by steve »

vincenttor wrote:I might overlooked the Faq on that.
You might not like it when you read it ;)

Basically, it's a lot of effort adding a new station type and then getting it working properly.
Steve
Post Reply