Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
No signal from transmiter?
-
- Posts: 2
- Joined: Mon 04 Feb 2013 1:41 pm
- Weather Station: N96FY
- Operating System: Windows 7
- Location: Hoddesdon, Herts
No signal from transmiter?
My first post, so apologies for any errors! My N96FY has performed well for the last 2 years. About 6 weeks ago the rain, outside temp, wind speed and direction info all disappeared from the screen. I changed batteries, checked and cleaned connections all to no avail. Today, I received a new transmitter from Maplin hoping that it would solve the problem. When the batteries were inserted in the transmitter the red light came on as expected. I left the display untouched but absolutely no change to the display. Any ideas??
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: No signal from transmiter?
You have to reset the base unit at the same time as the transmitter to get the two units to synchronise again. There are instructions on this in the manual iirc.
-
- Posts: 2
- Joined: Mon 04 Feb 2013 1:41 pm
- Weather Station: N96FY
- Operating System: Windows 7
- Location: Hoddesdon, Herts
Re: No signal from transmiter?
Thanks, by reset do you mean just taking the batteries out then reinserting them, or is there another more complicated way?
-
- Posts: 1124
- Joined: Sat 26 Feb 2011 1:58 pm
- Weather Station: Fine Offset 1080/1 & 3080
- Operating System: Windows XP SP3
- Location: SE London
Re: No signal from transmiter?
Hi,
Basically yes, for perhaps a minute to be sure. But don't omit to unplug the USB cable at the same time.
Cheers, Alan.
Basically yes, for perhaps a minute to be sure. But don't omit to unplug the USB cable at the same time.
Cheers, Alan.