Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.0.0 build 3048 - 02 March 2019.
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

See the Wiki for downloading either version.

Replacement for the standard rain gauge ... ???

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
Post Reply
User avatar
odintheterrible
Posts: 47
Joined: Wed 16 Jan 2013 8:18 am
Weather Station: Aercus WS3083 Wireless
Operating System: Windows 10 64-bit
Location: Torre-Pacheco, Murcia, Spain

Replacement for the standard rain gauge ... ???

Post by odintheterrible » Thu 01 Feb 2018 8:16 am

Greetings one and all,

Since relocating to Spain our WS3083 (Fineoffset) the station has been operating reasonably well ... except for the standard rain gauge.

It works OK when the rain is fairly constant and heavy, but this Spring has been relatively dry, with what can only be best termed as light mizzal/drizzle which is enough to leave small pools of water on the swimming pool cover, and the patio tiles to be visibly wet/damp etc ... but the rain gauge on the weather station (standard tipping bucket type) seems incapable of registering it.

I'm toying with the idea of buying a stand-alone rain gauge but before I do that, I would be interested to know if anyone has discovered or made a suitable replacement for the standard Fineoffset unit or if there is a modification which will improve the accuracy of the standard unit ??

Thanks

sfws
Posts: 466
Joined: Fri 27 Jul 2012 11:29 am
Weather Station: Final post in top ten topic
Operating System: Tempermental Win. 10 PC
Location: Moving

Re: Replacement for the standard rain gauge ... ???

Post by sfws » Thu 01 Feb 2018 5:53 pm

You might want to read an old topic http://sandaysoft.com/forum/viewtopic.php?f=13&t=6941 about accuracy
or http://sandaysoft.com/forum/viewtopic.php?f=13&t=5630 about modifications

AllyCat
Posts: 1051
Joined: Sat 26 Feb 2011 1:58 pm
Weather Station: Fine Offset 1080/1 & 3080
Operating System: Windows XP SP3
Location: SE London

Re: Replacement for the standard rain gauge ... ???

Post by AllyCat » Thu 01 Feb 2018 6:21 pm

Hi,

I did experiment with adding a 14 cm diameter plastic funnel above the normal FO rain sensor with the aim of achieving 0.1mm per tip. But to be honest it was rather a failure because the rain collected in beads in the funnel (even though it had much steeper sides than the FO) and didn't give an earlier warning of the onset of rain. I guess it might be equally unsuccessful recording small showers in low humidity, with the droplets evapourating before running down into the sensor.

I had planned to experiment with a metal funnel and/or a water-dispersant such as "Rain-X", but sorry, not tried yet.

Another possibility might be the Hydreon RG11 rain sensor which was discussed on the forum some years ago and is supported in real time (no logger) by Cumulus 1. Ideal for an "it's (started) raining" warning or it can emulate a ridiculously small tipping bucket (0.01 mm or less). But it's unlikely to have the accuracy of a tipping bucket and requires a significant power supply, not compatible with a simple battery power supply, even with a modest solar panel.

Cheers, Alan.

Post Reply