Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.7.0 (build 3089) - 28 July 2020 (please see important announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of the NOAA report and Snow Index drop-down menus to 2030)

Use this link to Download the Software (Cumulus MX / Cumulus 1 and other related items). Software

Cumulus 1.9.4 protocol

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
Post Reply
malc-c
Posts: 211
Joined: Mon 04 Jan 2010 10:01 pm
Weather Station: Maplin N96GY / WH1081
Operating System: Windows 10 Pro 64bit
Location: Stevenage, UK
Contact:

Cumulus 1.9.4 protocol

Post by malc-c »

I'm looking at developing my own weather station using the sensors that came with an old Maplin station and some digital one wire sensors for temperature etc. The idea is to have all the sensors hardwired into a box containing a PIC micro, with the data being written to an eprom, which would then be read and the data transmitted to a PC to be read by Cumulus 1.9.4.

Whilst the way the sensors work have been documented, what I cant seem to find is how Cumulus reads data from the base station such as the FO / Maplin units. Ideally I would like to use old fashioned serial communications between the PIC and PC to send the data, but would like to know if this is possible.

Any pointers would be welcome

Malc

User avatar
mcrossley
Posts: 6740
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Buster Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Cumulus 1.9.4 protocol

Post by mcrossley »

Have a search of the forum, this has come up before - and been done before, see weather arduino etc.

The FO data is from the reading of memory locations over USB. You'd be better looking at the Davis serial protocol which is well documented by the manufacturer.

malc-c
Posts: 211
Joined: Mon 04 Jan 2010 10:01 pm
Weather Station: Maplin N96GY / WH1081
Operating System: Windows 10 Pro 64bit
Location: Stevenage, UK
Contact:

Re: Cumulus 1.9.4 protocol

Post by malc-c »

Thanks Mark,

I tried a search, but the results were more to do with the protocol between the TX and RX units rather than to the PC..

Sounds like the Davies serial data would be a better bet.

Post Reply