Page 5 of 5

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Wed 16 Aug 2017 7:23 pm
by laulau
Hi,
I've connected WeatherDuino Pro2 PLUS to a Raspberry Pi2 with CMX V3 b3043 running .
I noticed i've very often this message in MXdiag file : !!! loop data not received, bytes received = 95
What does it mean ?

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Thu 17 Aug 2017 8:33 pm
by Werk_AG
Hi Laurent,

This means that by sure you have done significant changes on the WeatherDuino Pro2 PLUS code, which makes that it is busy doing something else, instead of being ready to answer to loop commands.

A possible cause could be a change in the WU upload routines to try to upload data more frequently than allowed. But there are many other possibilities. Execution time of each routine is critical. If you want to change the code you should be very careful about the execution time of each routine.

By the amount of times you are getting the message "loop data not received" I could bet that the changes are somehow related with the use of the WiFi

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Thu 17 Aug 2017 8:43 pm
by laulau
Werk_AG wrote:Hi Laurent,

This means that by sure you have done significant changes on the WeatherDuino Pro2 PLUS code, which makes that it is busy doing something else, instead of being ready to answer to loop commands.

A possible cause could be a change in the WU upload routines to try to upload data more frequently than allowed. But there are many other possibilities. Execution time of each routine is critical. If you want to change the code you should be very careful about the execution time of each routine.

By the amount of times you are getting the message "loop data not received" I could bet that the changes are somehow related with the use of the WiFi
You're right, i'm using WIFI to get data (domotique) from my server to display them in a specific screen. :oops:
I'll have a go with this 'domodata' disabled to see what happens .
Thanks

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Thu 17 Aug 2017 9:04 pm
by laulau
It' working fine with my code modifications disabled. I was doing a request (through WIFI) every minute ! :bash: :bash:
Will do that every 10 minutes and see how it works.
Thanks again Werk_AG

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Tue 03 Apr 2018 9:32 pm
by Werk_AG
Image

All users of the WeatherDuino Pro2 PLUS can now add Air Quality data to their Weather Station.

Image

The WeatherDuino Air Quality Monitor, is a device which can be used as stand alone unit, but also have the capability to send data to a WeatherDuino Pro2 PLUS receiver, which by turn can send this data to a ThingSpeak channel, or directly to your Wunderground webpage, using the WiFi capabilities of the WeatherDuino Pro2 PLUS receiver.

Here is a link to my ThingSpeek public channel, where you can see live data from Meteocercal Weather Station: https://thingspeak.com/channels/317451
Here is Air Quality live data directly on MeteoCercal website: http://www.meteocercal.info/wx_AirQualityIndex.php

Image


Example of PM2.5 and PM10 graph at Wunderground:

Image

The sensor used to measure PM2.5 and PM10 particles is the PMS7003.

Image

For more info about the WeatherDuino Air Quality Monitor, please visit the WeatherDuino support forum

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Mon 14 May 2018 5:09 pm
by Werk_AG
Image

The WeatherDuino WiKi is already available.
Still is a work in progress, but already contains a lot of useful info, specially for those who are looking for quick information about the WeatherDuino system.
Everyday more info is being added.

For visiting it, please click in the link below

WeatherDuino WiKi

Re: WeatherDuino Pro2 - Build yourself a full Weather Station

Posted: Fri 11 Jan 2019 5:25 am
by Werk_AG
A member of the WeatherDuino Team (Jarek from Poland) designed a set of nice 3D printable enclosures for the Pro2 PLUS and Pro2 Compact receivers, as also for the WiFi Wireless Display units.
The files for 3D printing the enclosures are available for free. Download link here: WeatherDuino Custom designed 3D printable boxes

Pro2 PLUS receiver box
Image

Pro2 Compact receiver box (also usable for the WiFi Wireless Display units)
Image

Image