Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.9.0 (build 3095) - 09 October 2020 (please see announcement regarding releases since 3.5.0)
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of the NOAA report and Snow Index drop-down menus to 2030)

Use this Wiki link to Download the Software (Cumulus MX / Cumulus 1 and other related items).

Arduino receiver for Auriol H13726 / Ventus W155

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
Post Reply
User avatar
Werk_AG
Posts: 182
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino Pro2 PLUS
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Arduino receiver for Auriol H13726 / Ventus W155

Post by Werk_AG »

I have published yesterday, with a GNU General Public License v3 a new software for an Arduino based RF receiver for this low level weather stations:
Auriol H13726 / Ventus W155 / Hama EWS 1500 / Meteoscan w155 w160 / Alecto WS-3500 / Balance RF-WS100

It is compatible with Cumulus, via easyweather.dat file. It can also receive RF data from extra sensors ( a better temperature / humidity sensor, for exemple) when used with a specialy designed RF emiter board.

All info on this page: MeteoCercal - Auriol / Ventus Weather Station Tools


Hope it can be usefull for someone.

Latest Version: AuriolDuino_RF_Receiver_v400_b006 - Release date: 12/05/2014
Last edited by Werk_AG on Tue 03 Jun 2014 2:26 am, edited 4 times in total.
Do it Yourself - The freedom to use the weather instruments you want.

Image

User avatar
Werk_AG
Posts: 182
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino Pro2 PLUS
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: Arduino receiver for Auriol H13726 / Ventus W155

Post by Werk_AG »

Edited - Now, info about latest releases are at the bottom of the first post! See above, please.

Downloads and more info : MeteoCercal - Auriol / Ventus Weather Station Tools

Image
Do it Yourself - The freedom to use the weather instruments you want.

Image

User avatar
Werk_AG
Posts: 182
Joined: Sun 13 Jan 2013 8:04 pm
Weather Station: WeatherDuino Pro2 PLUS
Operating System: Windows 7
Location: Cercal CDV - Portugal
Contact:

Re: Arduino receiver for Auriol H13726 / Ventus W155

Post by Werk_AG »

There are great news for the owners of weather stations like the Auriol H13726, Ventus W155, Hama EWS 1500, Meteoscan w155 / w160, Alecto WS-3500 and Balance RF-WS100.

The AuriolDuino system was merged into the WeatherDuino Pro2 system.

From now on, owners of Auriol weather stations (and compatibles) can also benefit from all the advantages offered by the WeatherDuino Pro2 system:

- Davis Vantage emulation
- Hardware data logger
- Works with Cumulus1 or Cumulus MX software.
- And many others features...

For all the weather stations mentioned above, all that is needed is a receiver unit based in a WeatherDuino Pro2 RX board. For those that will prefer a fully assembled and tested receiver unit, it is available too.

Later you can upgrade your weather station to a full WeatherDuino Pro2 system, which supports a wide range of types and brands of weather instruments, and continue to use the same receiver unit.
Do it Yourself - The freedom to use the weather instruments you want.

Image

Post Reply