Hi, I'm actually using cumulus 1.9.2 b996 and I see a "strange" behaviour.
Whenever I stop and restart cumulus the historical graphs (temperature, rain, wind, etc...) get less resolution than before stopping.
The problem is more evident in the wind plot since I'm using 10minutes average for wind speed.
Additionally the wind direction plot loses the average and every past spot of direction is shared by the average.
I will try to make screenshot to help understand better.
I didn't notice this behaviour in the 1.9.1 betas... but maybe I never looked at it.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Historical graphs and cumulus restart
- nking
- Posts: 808
- Joined: Thu 17 Dec 2009 2:03 pm
- Weather Station: W-8681
- Operating System: Windows 10
- Location: Hurstpierpoint, West Sussex, UK
- Contact:
Re: Historical graphs and cumulus restart
Don't bother with the screen shot as this is not an error. When restarted Cumulus will display plot points based upon your update interval, when running it shows data every minute (it may be 48 secs but I can't remember). I hope this answers your question.
-
- Posts: 30
- Joined: Tue 28 Dec 2010 12:16 pm
- Weather Station: PCE FWS-20 = Fine Offset WS1080
- Operating System: Windows 10 x64
- Location: Italy, Mondo Nuovo
Re: Historical graphs and cumulus restart
Ok, good, but why don't keep the old dense values?nking wrote:Don't bother with the screen shot as this is not an error. When restarted Cumulus will display plot points based upon your update interval, when running it shows data every minute (it may be 48 secs but I can't remember). I hope this answers your question.
If the old values are every 2 minutes (because cumulus was on and no data are read from the station datalogger) I think that it could keep them when restarting.
And if cumulus was off for a certain period of time and after restart it gets some readings from the station datalogger (which in my case and generally often is set to a lower resolution than 2 minutes) only the new data would be sparse, isn't so?
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Historical graphs and cumulus restart
If you want it to keep the one-minute data, tell it do so - set your logging interval to one minute. The same with your station.
Steve