Page 1 of 1
LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 3:05 pm
by bepcan
Hi everyone, Cumulus 1.9.4 often shows strange values for inside temperature. My station is LaCrosse WS2307. Any idea?
B
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 3:15 pm
by steve
If that's the only item that does that, then I would think it's probably the sensor that's faulty. Are you using a real serial port or a USB adapter?
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 3:31 pm
by bepcan
Hi, I am using a USB adapter!
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 4:59 pm
by steve
USB adapters are known to cause problems with La Crosse stations, which is why I don't offer support for Cumulus when using them. But if it's only the inside temperature that's doing this, it's probably nothing to do with the USB adapter and more likely to be the sensor failing.
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 5:44 pm
by bepcan
I think I could use the software included with the sensors (HeavyWheather, I am not sure) and the console to download data from console to PC, I could verify if inconveniences still remain
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Mon 15 Jun 2015 6:46 pm
by steve
Yes, that's worth trying. But note that you may not see the problem if you're only looking at logger data and not live data (assuming the Cumulus readings are from live data).
Re: LaCrosse WS2307 - inside temperature bad data
Posted: Tue 16 Jun 2015 6:15 am
by bepcan
Of course, so I will use an other software with the possibility to display graphs.