Page 2 of 4

Re: Tutorial for uploading to AWEKAS

Posted: Wed 09 Jun 2010 1:20 pm
by tjaliwalpa
steve wrote: ... I've noticed a problem in your template, you have 'mm' for your pressure units. ...
Thanks again Steve

Bob

Re: Tutorial for uploading to AWEKAS

Posted: Wed 09 Jun 2010 1:35 pm
by tjaliwalpa
Steve,

Did one final check before going to bed and the data is up and running.

Thanks for your help,

Bob

http://www.awekas.at/en/instrument.php?id=6924

Re: Tutorial for uploading to AWEKAS

Posted: Wed 09 Jun 2010 2:28 pm
by n9mfk
Hi all ,
I found out if you have a station
no solar data change
<#SolarRad><br>
<#UV><br>
to
---<br>
---<br>

i noted there is snow on the dashboard but no spot in the file
beau

Re: Tutorial for uploading to AWEKAS

Posted: Wed 09 Jun 2010 3:13 pm
by steve
You have to put snow in manually, in a 'report'.

Re: Tutorial for uploading to AWEKAS

Posted: Wed 08 Jun 2011 7:23 am
by Sunfish
Wouldn't AWEKAS have perhaps been a better candidate for Cumulus to support than say, Weather Bug?

Re: Tutorial for uploading to AWEKAS

Posted: Wed 08 Jun 2011 7:37 am
by steve
Sunfish wrote:Wouldn't AWEKAS have perhaps been a better candidate for Cumulus to support than say, Weather Bug?
That's an odd comment, given that uploads to AWEKAS are already possible using Cumulus, as described at the start of this thread, and here in the wiki - http://wiki.sandaysoft.com/a/AWEKAS

Re: Tutorial for uploading to AWEKAS

Posted: Wed 08 Jun 2011 7:59 am
by Sunfish
OK, "support", in the manner of CWOP, WU, PWS, WB.

Re: Tutorial for uploading to AWEKAS

Posted: Wed 08 Jun 2011 8:33 am
by steve
The existing Awekas support seems to work fine. Weatherbug uses the Weather Underground protocol, so it was easy to add support for that as I effectively already had the code written, and lots of people had asked me to add support for Weatherbug. It seems to me that my time is better spent adding new features than duplicating existing ones.

I don't know what form the Awekas direct protocol takes; if they are using the WU protocol like almost everyone else, then it would be straightforward to add it. But I regard it as low priority as a working method already exists.

Re: Tutorial for uploading to AWEKAS

Posted: Wed 08 Jun 2011 10:00 am
by Sunfish
Thanks for the explanation.

Re: Tutorial for uploading to AWEKAS

Posted: Sun 11 Dec 2011 6:32 pm
by neil
Hello all
I have just setup AWEKAS and its seems to be working ok
as usual i just dived in and didnt read the instructions properly :lol:
While i was looking through the wiki entry for AWEKAS i found the section that says the upload file must be called awekas_wl.htm
my file is called awekas.htm and still seems to function correctly is this luck or am i creating a problem for myself at a later date?
any ideas
Neil

Re: Tutorial for uploading to AWEKAS

Posted: Sun 11 Dec 2011 6:46 pm
by steve
I don't think it matters what you call it as long as you tell Awekas where it is.

Re: Tutorial for uploading to AWEKAS

Posted: Sun 11 Dec 2011 7:06 pm
by neil
Thanks Steve
I presumed it would not be a problem as all seems to be ok http://www.awekas.at/en/instrument.php?id=8890
Quite an interesting site but the quality checking can be a bit of a pain
I would be interested to know how many stations they use as a comparison to your own stations data
The nearest stations to mine are in dover some 20 miles away I work in that area and know they have there own micro climate as does thanet (both coastal locations)so i wonder how accurate the comparisons are ?
Neil

Re: Tutorial for uploading to AWEKAS

Posted: Wed 21 Mar 2012 9:08 am
by AWEKAS
Hello

I am Othmar the owner and programmer of AWEKAS.

I have two questions:
We have a case that a user can not periodically upload data to AWEKAS. Only if he force the upload it works weel. The scheduler did not work. Any idea?
http://www.awekas.at/for2/index.php?pag ... adID=11025

Question 2: Is it possible to integrate the AWEKAS direct method to Cumulus? It's a HTTP request to a URL on our server. I send the programmer of cumulus a description from the API if he will include AWEKAS direct protocol. Please contact me per mail. Its easier for user to set the parameters and he did not need a webspace. Also traffic is minimiced.

Best Regards
Othmar Gattringer
http://www.awekas.at

Re: Tutorial for uploading to AWEKAS

Posted: Wed 21 Mar 2012 9:22 am
by steve
AWEKAS wrote:We have a case that a user can not periodically upload data to AWEKAS. Only if he force the upload it works weel. The scheduler did not work. Any idea?
http://www.awekas.at/for2/index.php?pag ... adID=11025
It's hard to say without more information. Has he ticked 'auto update'? Do other uploads work? Does he have a fully functioning weather station - http://wiki.sandaysoft.com/a/FAQ#Cumulu ... eb_uploads
I've found his Awekas page and it appears he has no pressure reading. That would stop auto-update working.
Is it possible to integrate the AWEKAS direct method to Cumulus? It's a HTTP request to a URL on our server.
If you would like to send me the protocol by private message I can consider adding it. But I have a long list of enhancement requests, and since there is already a working method of uploading to Awekas, it would not be a high priority.

Re: Tutorial for uploading to AWEKAS

Posted: Thu 04 Jul 2013 6:11 pm
by josecmorales
Im trying to send the data but i dont know why the website dont update, only show this

http://climaguayana.comuv.com/test/awekas_wl.htm