Hi All, my WH1081 memory is about 25% full and the data had been downloaded previously into another PC running Cumulus.
I have installed Cumulus 1.9.2 onto my Windows 7 PC and hooked up the WH1081 but looking at the graph's it only appears to have downloaded the last record. Pretty sure I followed the install guide and can't see what i have done wrong.
Any ideas please.
Thanks.
Roger.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
New Install But Only Downloaded Last Record
-
- Posts: 32
- Joined: Fri 01 Jan 2010 2:18 pm
- Weather Station: WH1081
- Operating System: Windows XP
-
- Posts: 32
- Joined: Fri 01 Jan 2010 2:18 pm
- Weather Station: WH1081
- Operating System: Windows XP
Re: New Install But Only Downloaded Last Record
Thanks Alan, on the case. I might just leave it!
-
- Posts: 32
- Joined: Fri 01 Jan 2010 2:18 pm
- Weather Station: WH1081
- Operating System: Windows XP
Re: New Install But Only Downloaded Last Record
If I decide to give it a try, will it be ok to use an artificial timestamp well in the past to ensure I collect all the data on the device? Thing is I don't know exactly how far the data goes back!
-
- Posts: 1124
- Joined: Sat 26 Feb 2011 1:58 pm
- Weather Station: Fine Offset 1080/1 & 3080
- Operating System: Windows XP SP3
- Location: SE London
Re: New Install But Only Downloaded Last Record
Hi Roger,
Yes, Cumulus seems to work fine if you set a timestamp (date) earlier than the first available record.
Cheers, Alan.
Yes, Cumulus seems to work fine if you set a timestamp (date) earlier than the first available record.
Cheers, Alan.
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Install But Only Downloaded Last Record
You could have just copied over the Cumulus data files from your old PC and it would have carried on from where it left off before.
-
- Posts: 32
- Joined: Fri 01 Jan 2010 2:18 pm
- Weather Station: WH1081
- Operating System: Windows XP
Re: New Install But Only Downloaded Last Record
Thanks Mark, might try that too. I think I've jumped in a bit!
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Install But Only Downloaded Last Record
That is a better solution, because the data files will normally have the data to a greater resolution than the logger, and all your records etc will be carried forward and not have to be recalculated from the logger data - again with possible loss of some extreme values because the logger only contains snaphots.
-
- Posts: 32
- Joined: Fri 01 Jan 2010 2:18 pm
- Weather Station: WH1081
- Operating System: Windows XP
Re: New Install But Only Downloaded Last Record
Just a quick update, I transferred the data as suggested. Thanks for the help.
Roger.
Roger.