No data wh1080

[hurring]

Hi All
still having issues. I am running cumulus 1.8.8 and it is not showing any data, all 0. If I close cumulus and open easy weather I get live data. open cumulus again still 0 data. Any ideas. Have attached Diag files.
I am using windows 7. I am hoping to get another machine to just run cumulus and see how that goes but I would love to get this working as it did when I first installed.
cheers
Adrian

[steve]

Cumulus is ignoring all of your data as suspect because your relative pressure setting is wrong:

2010-06-11 08:09:30 : EWUSB: Read pressure values: rel=1280.4 abs=1573.1 offset =-292.7
2010-06-11 08:09:30 : EWUSB: Ignoring dubious relative pressure reading, using offset of zero

2010-06-11 08:11:55 : EWUSB: Ignoring bad data: pressure = 1578.5

But it looks like you have a problem with your sensor. It's not just your relative pressure that's the problem, your absolute pressure is impossibly high. Presumably Easyweather is showing the same impossible pressures?

[hurring]

Hi Steve,
this is an issues with my station, has been dodgey from day 1. I will try adjusting the reading and see what that does, although I have seen that error come up before and I was still getting data.
Adrian

[steve]

If the offset is clearly wrong, but somehow the station manages to produce a pressure which is within sensible bounds, then Cumulus will accept the reading and hence all the other data along with it. It was a sort of communal design decision amongst Fine Offset owners that one bad parameter would cause all of the other data to be ignored also. I guess it ought to be an option, for cases of a permanent problem like yours.

[hurring]

Thanks Steve that explains why it works on and off, an option would be good until I can get around to buying anew unit.
Adrian

[steve]

I've raised an enhancement request so it doesn't get forgotten - there was something else recently that I said I'd do, but I've already forgotten what that was. I guess people will eventually realise that I have a memory like a sieve, and if things don't get put in the enhancement requests, they won't get done

[Gina]

That sounds like me Steve

[hurring]

OK All good, I have adjusted the readings and restarted. All working nicely now. I am guessing though that if the pressure goes to high or low it will drop out again. Will watch and see.
thanks for the help
Adrian