Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Bump on the head

Discussion specific to Fine Offset and similar rebadged weather stations
Post Reply
profzarkov
Posts: 99
Joined: Fri 15 Jan 2010 1:51 pm
Weather Station: HP2551
Operating System: Win7 or 10
Location: Trefin, West Wales
Contact:

Bump on the head

Post by profzarkov »

Hi
My tablet running Cumulus fell off the shelf recently and an internal board became loose.
After reseating and rebooting, all was well..... except it’s clock was one day ahead!
I didn’t realise this until a neighbour told my Station was really futuristic!
I have reset the tablets clock but of course it has data from”tomorrow “!
What do I have to do to reset Cumulus?
All the current data reads zero. :roll:
Cheers
Steve

Weather.vivatek.co.uk
User avatar
mcrossley
Posts: 12694
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Bump on the head

Post by mcrossley »

Stop cumulus, restore the data files from the last daily backup folder before the accident, and start Cumulus again. It should catch up the missing data from your logger.
profzarkov
Posts: 99
Joined: Fri 15 Jan 2010 1:51 pm
Weather Station: HP2551
Operating System: Win7 or 10
Location: Trefin, West Wales
Contact:

Re: Bump on the head

Post by profzarkov »

Thanks for that.
I used the daily file editor and just deleted tomorrow!
It seems to have worked!
Cheers
Steve
profzarkov
Posts: 99
Joined: Fri 15 Jan 2010 1:51 pm
Weather Station: HP2551
Operating System: Win7 or 10
Location: Trefin, West Wales
Contact:

Re: Bump on the head

Post by profzarkov »

Or not.
Cumulus seems to work but a while later gives zeros for most readings!
I’ll use the back up data.
Post Reply