Hi Guys.
i have tried and tried to set my time for actual time but every night it reverts back to 1 hour advance. Can anyone advise me what to do? I am using a AERCUS WS3083 many thanks John
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Issues with Time BST
-
- Posts: 12
- Joined: Sun 26 Oct 2014 2:08 pm
- Weather Station: AERCUL WS3083
- Operating System: Windows 7
- Location: Harbourneford
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Issues with Time BST
Have you set the time zone to -1? From a bit of googling, it appears that's what it needs to be for the UK for this station.
Steve
-
- Posts: 12
- Joined: Sun 26 Oct 2014 2:08 pm
- Weather Station: AERCUL WS3083
- Operating System: Windows 7
- Location: Harbourneford
Re: Issues with Time BST
steve wrote:Have you set the time zone to -1? From a bit of googling, it appears that's what it needs to be for the UK for this station.
I cannot find any settings to perform that task. When the RCC symbol comes up it puts my station forward 1 hour. I keep adjusting it and alas it will keep advancing 1 hour UTC
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Issues with Time BST
According to the Aercus manual, here - http://www.greenfrogscientific.co.uk/co ... ents-E.pdf
"Press the MENU key to select the TIME section, the TIME section digits will start flashing and you will be in the
LCD contrast setting mode (level 1-8, default level 5), press the UP or DOWN key to set the value. Level 1
will produce the faintest appearance level 8 the darkest.
Press the ENTER key to select the following:
Time zone
12/24h time display (default 12h)
Manual time setting (hours/minutes)
Press the UP or DOWN key to set each value.
Note: The radio controlled clock (RCC) works off the German DCF77 time signal received across large parts of
Europe and the UK so set your time zone as follows:"
And then for the UK it says to use -1.
"Press the MENU key to select the TIME section, the TIME section digits will start flashing and you will be in the
LCD contrast setting mode (level 1-8, default level 5), press the UP or DOWN key to set the value. Level 1
will produce the faintest appearance level 8 the darkest.
Press the ENTER key to select the following:
Time zone
12/24h time display (default 12h)
Manual time setting (hours/minutes)
Press the UP or DOWN key to set each value.
Note: The radio controlled clock (RCC) works off the German DCF77 time signal received across large parts of
Europe and the UK so set your time zone as follows:"
And then for the UK it says to use -1.
Steve
-
- Posts: 12
- Joined: Sun 26 Oct 2014 2:08 pm
- Weather Station: AERCUL WS3083
- Operating System: Windows 7
- Location: Harbourneford
Re: Issues with Time BST
Many thanks Steve. My pocket manual did not have those details there. I have set it all ok. Thanks again Johnsteve wrote:According to the Aercus manual, here - http://www.greenfrogscientific.co.uk/co ... ents-E.pdf
"Press the MENU key to select the TIME section, the TIME section digits will start flashing and you will be in the
LCD contrast setting mode (level 1-8, default level 5), press the UP or DOWN key to set the value. Level 1
will produce the faintest appearance level 8 the darkest.
Press the ENTER key to select the following:
Time zone
12/24h time display (default 12h)
Manual time setting (hours/minutes)
Press the UP or DOWN key to set each value.
Note: The radio controlled clock (RCC) works off the German DCF77 time signal received across large parts of
Europe and the UK so set your time zone as follows:"
And then for the UK it says to use -1.
-
- Posts: 1
- Joined: Sun 12 Jul 2020 8:05 pm
- Weather Station: Aercus WS3083
- Operating System: Windows 10
Re: Issues with Time BST
I have recently (March 2020) started using an Aercus WS3083 that was lying in its box for several years.
After battery insertion, I set the clock manually, using the time offset as recommended in the manual.
Periodically the receiver console flashes DCF next to the time.
The DCF77 transmitter is 840km from my home, whereas the NPL-MSF transmitter at Anthorn is only 140km.
The time indicated drifts substantially, sometimes by minutes, sometimes by as much as 4 hours.
This makes a mess of data uploads to my computer.
I notice there has been a discussion about how to resolve this.
Does anyone know where the radio receiver for the clock is located?
Is it possible to disconnect the RCC?
Better still, is it possible to tell the RCC to listen for the 60kHz signal from Anthorn?
Is it possible to keep the clock permanently on UTC without "daylight saving"?
After battery insertion, I set the clock manually, using the time offset as recommended in the manual.
Periodically the receiver console flashes DCF next to the time.
The DCF77 transmitter is 840km from my home, whereas the NPL-MSF transmitter at Anthorn is only 140km.
The time indicated drifts substantially, sometimes by minutes, sometimes by as much as 4 hours.
This makes a mess of data uploads to my computer.
I notice there has been a discussion about how to resolve this.
Does anyone know where the radio receiver for the clock is located?
Is it possible to disconnect the RCC?
Better still, is it possible to tell the RCC to listen for the 60kHz signal from Anthorn?
Is it possible to keep the clock permanently on UTC without "daylight saving"?