Welcome to the Cumulus Support forum.

Latest Cumulus MX release 3.16.1 (build 3183) - 06 May 2022

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are interested in supporting Cumulus then maybe you would like to contribute to the maintenance of the Wiki? This need not take hours of your time - just a half hour here and there can make a big difference, particularly if many people are doing this. Any contributions are very welcome, whether they involve new content or editing of existing content. It will be very helpful to current and future users of Cumulus software if the Wiki is kept well-maintained and current. If you are interested then please contact forum user saratogaWX and ask for a Wiki account.

RPi bullseye install issue

Talk about anything that doesn't fit elsewhere - PLEASE don't put Cumulus queries in here!
Post Reply
User avatar
HansR
Posts: 3325
Joined: Sat 20 Oct 2012 6:53 am
Weather Station: GW1100 (WS80/WH40)
Operating System: Raspberry OS/Bullseye
Location: Wagenborgen (NL)
Contact:

RPi bullseye install issue

Post by HansR »

When installing a fresh version of bullseye (or running an upgrade) you may encounter a sudden slowdown of everything. Installing literally takes hours.

The cause of this may be that your Pi gets into a loop shouting every minute:
to install the screen reader, press control alt space
If you are using a headless install you probably won't notice until you look into the journal and htop and Google around or plug in earphones and listen. This belongs to the VNC server asfaik and if you boot into the VNC you have a problem even if you run headless. To switch this off is actually a requirement to get a good performance of your Pi.

To switch it off once do the following:

Code: Select all

ps -eaf | grep wiz
which results in something like:
    Schermafbeelding 2022-01-10 125234.jpg
      Then kill the piwiz process by the following command (note you have to use the pid on your machine):

      Code: Select all

      sudo kill -9 810
      This frees your RPi from a resource eating monster delaying everything you do.
      This immediately lets you get your work done in the sprint your RPi takes.

      To prevent this from ever happening again uninstall it:

      Code: Select all

      sudo rm -f /etc/xdg/autostart/piwiz.desktop
      Pfff.... that was a relief :roll:
      The ever brilliant person who activated this should be...
      You do not have the required permissions to view the files attached to this post.
      Hans

      https://meteo-wagenborgen.nl
      https://meteo-wagenborgen.nl/CMX4
      CMX build 3182 ● Ecowitt GW1100/WS80/WH40 ● RPi 3B+ ● Raspberry OS 5.10.103 ● Mono 6.12.0.122
      CMX build 40xx ● Ecowitt GW1100/WS80/WH40 ● RPi 4B ● Raspberry OS 5.15.32 ● .NET 6.0.1
      Post Reply