Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.1.2 build 3055 - 4 November 2019.
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

See the Wiki for downloading either version.

**Newbie needs setup help!!**

Talk about anything that doesn't fit elsewhere - PLEASE don't put Cumulus queries in here!
Post Reply
gwladok5
Posts: 2
Joined: Tue 01 Jan 2019 10:38 am
Weather Station: Watson W-8681-Pro II
Operating System: Windows 10

**Newbie needs setup help!!**

Post by gwladok5 » Tue 01 Jan 2019 10:56 am

Hi!

Ive just bought the Watson W-8681-Pro II Weather station.

Wondered if anyone can help with a couple of issues?

Firstly the indoor sensor is showing the default 1024mb pressure all the time - not vital as this is not reported to the Central Station.

On the console I have REL pressure history showing but its calibrated 1035.5 down to 333.7 so I'm showing a continuous red measurement line.

Since the pressure range can't be that extreme, how can I amend?

Thanks for your time.

freddie
Posts: 508
Joined: Wed 08 Jun 2011 11:19 am
Weather Station: Davis Vantage Pro 2
Operating System: GNU/Linux (Ubuntu 18.04)
Location: Dorrington, Shropshire
Contact:

Re: **Newbie needs setup help!!**

Post by freddie » Tue 01 Jan 2019 11:35 am

Hi, welcome to the forum.

Which version of Cumulus are you using?
Freddie
Image

gwladok5
Posts: 2
Joined: Tue 01 Jan 2019 10:38 am
Weather Station: Watson W-8681-Pro II
Operating System: Windows 10

Re: **Newbie needs setup help!!**

Post by gwladok5 » Tue 01 Jan 2019 1:29 pm

I used Cumulus with my old W-8681 but have not yet connected the Pro II to my PC.

Version 1.9.4 build 1099

freddie
Posts: 508
Joined: Wed 08 Jun 2011 11:19 am
Weather Station: Davis Vantage Pro 2
Operating System: GNU/Linux (Ubuntu 18.04)
Location: Dorrington, Shropshire
Contact:

Re: **Newbie needs setup help!!**

Post by freddie » Tue 01 Jan 2019 1:53 pm

Unfortunately the Pro II isn't supported by Cumulus, so you cannot connect it directly. However, if it can be configured to output in EasyWeather format then you can use Cumulus. Both of these points are covered in the Wiki (https://cumuluswiki.wxforum.net/a/Supported_Devices) - see near the bottom of the page.

As to your specific questions, I'm afraid I know nothing about Watson stations. Hopefully someone else will chip in here and help you.
Freddie
Image

Post Reply