Cumulus Support

Several times in recent weeks, my weather has apparently become catastrophic, with massive drops to unrealistically low pressure values. It happened again last night, as you can see. The console itself continues to display the correct and realistic values but Cumulus and the updated webpages show really odd values indeed. I am beginning to think this must be something to do with the processor on which I'm running Cumulus... Getting fed up now.

If you zip up the diags folder and attach it to a reply in this thread, I'll see if I can see anything.

But note that you are not using the latest build, so that makes support harder.

Hi Steve,
Attached is the zipped Diags folder but things are worsening as I type. The diags files for today show the pressure values all over the place. You can ignore the wind reading errors, the anemometer is failed at the present, waiting replacement. Anyway, the console is now showing a pressure of 878.3 so I suspect it has developed some serious fault. I'll try powering it off and a factory reset but might be looking for something new after 5 years of this one
Mike

Yes, looks like a problem with your station.

mikechristelow wrote:I'll try powering it off and a factory reset but might be looking for something new after 5 years of this one
Mike

Looks a lot like what my old Fine Offset was doing at around 4 years of age.
Partially attributed some problems to low console batteries, but didn't pursue other possible issues,
It just seem to act a bit crazy at times.

Phil.