Cumulus Support

odintheterrible

Even though I always had the "Synchronise Fine Offset reads" check box ticked, the software/station ...

devil

... It sounds like you mean the Fine Offset station - these are well known for ... are using the settings in Cumulus to synchronise reads with the station? Steve, thanks for your ...

Are you saying this happens with Weather Display too?

What weather station? You have two in your profile. It sounds like you mean the Fine Offset station - these are well known for the USB connection locking up. I assume you are using the settings in Cumulus to synchronise reads with the station?

vr34

... attempts modyfiying the "synchronise Fine Offset Reads" option did not fix the lockup. :( 2) ...

AllyCat

... issue with the (more recent) Fine Offset stations. A quick forum search found ... you probably need to set the "Synchronise Fine Offset Reads" option. But here is a thread with ...

AllyCat

... all of the "recent" Fine offset 108x and 308x stations. Nothing ... firmware. Have you selected the "Synchronise Fine Offset reads" option in the Cumulus Configuration ...

AllyCat

Hi, The Fine Offset stations with solar sensors do seem ... to the 'lock up' problem, and the 'synchronise' facility in Cumulus doesn't seem ... in detail at how the "synchronise reads" operates, but the additional transmissions ...

vagos

I have rebooted the station in total.

Works again.

I have also enabled

"Synchronise Fine Offset reads"

Work around for Fine Offset console USB lockup problem

Question: The clock on the station has anything to do with Cumulus logging time stamp?

I'll revert back with feedback

Will-NZ

... had read about the issue with the fine offset stations and set the 'synchronise fine offset reads' to on from the get-go. I made the comment ...

... problem is very common with Fine Offset stations, a significant number of threads in the forum are about this. This is ... the station is writing to it. See the 'Synchronise Fine Offset reads' setting. It ...

It's a side effect of the 'synchronise Fine Offset reads' operation. When the two avoidance cycles and the real time clock line up in a certain way, it isn't allowed to read data for over a minute, so the 'data appears to have stopped' is triggered.

That looks like the usual Fine Offset USB lockup. Are you using the setting to synchronise Fine Offset reads?

Re your question about using your sensors with another setup, you could look at Weatherduino.

It displays "Sync 1" and "Sync 2" in the status bar while it is doing the two phases of the synchronisation process, once a day, when the "Synchronise Fine Offset Reads" setting is selected.

... a WH1080 setting. There is "Fine Offset" (the one you should be using) ... stations. Are you using the "synchronise Fine Offset reads" setting in Cumulus? Maybe the extreme ...

Presumably you are using the "Synchronise Fine Offset Reads" setting - have you set a FOReadAvoidPeriod in Cumulus.ini? See this thread - https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=15190

Cumulus Support

Search found 110 matches: synchronise fine offset reads

Re: Upgrading to v3047 from v3043 ...

Re: Data flatlining

Re: Data flatlining

Re: Problem: Aercus WS3083 station and MX ....

Re: Problem: Aercus WS3083 station and MX ....

Re: AERCUS WS3083 weather station ...

Re: WS3083 USB Connection problems

Re: MX 3043 Issues

Re: Console lockup- error loading data on reboot.

Re: Console lockup- error loading data on reboot.

Re: Data appears to have stopped

Re: CumulusMX shows 32 F and other default values after a few hours

Re: What is the Sync indication on the bottom bar of cumulus screen display

Re: Strange behaviour after reset of WH1080

Re: Cumulus MX 3038 and Error reading data from station