Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Search found 1124 matches
- Wed 12 Jan 2022 5:31 pm
- Forum: Fine Offset/EasyWeather
- Topic: Battery life
- Replies: 102
- Views: 69377
Re: Battery life
Hi, These stations rarely achieved the claimed 150 metres "open field" range, but it shouldn't affect the transmitter battery consumption, which is simply a "transmit and hope" protocol. I have experienced the Console's microcontroller "crashing" when its batteries get ...
- Tue 11 Jan 2022 6:23 pm
- Forum: Fine Offset/EasyWeather
- Topic: Battery life
- Replies: 102
- Views: 69377
Re: Battery life
Hi, I don't think I can add anything much to my previous post; I wouldn't recommend anything other than 2 x NiMH, or 2 x NiZn, or 1 x LiFePO4 (plus a "placeholder") AA cells, if Alkalines cannot be used. The Wind reed switch should have a current limiting resistor and can be replaced by a ...
- Tue 11 Jan 2022 6:00 pm
- Forum: Fine Offset/EasyWeather
- Topic: Maplin in administration - where to buy spare parts now?
- Replies: 30
- Views: 24566
Re: Maplin in administration - where to buy spare parts now?
Hi, I believe the transmitter part probably is compatible with a "Maplin" station produced after about 2012, but that link seems an expensive solution. The transmitter should send the Temp/Hum/Wind/Rain data in the same packet format as the WH108x uses, and the "solar pod" genera...
- Tue 21 Dec 2021 11:11 pm
- Forum: Cumulus MX Current (releases since b3043)
- Topic: Solar/UV Info
- Replies: 46
- Views: 3333
Re: Solar/UV Info
Hi, @HansR: Thanks for your comment. I don't believe that I currently have Editing rights, but let's wait to see if there is any other feedback on my comments. :) @Gyvate: Apologies, my comments were primarily intended as a reply to the OP who did ask specifically about UV. Maybe the ambientweather ...
- Tue 21 Dec 2021 3:05 pm
- Forum: Cumulus MX Current (releases since b3043)
- Topic: Solar/UV Info
- Replies: 46
- Views: 3333
Re: Solar/UV Info
Hi, ... and a nice compilation of the reasoning behind this can be found at https://help.ambientweather.net/help/why-is-the-lux-to-w-m-2-conversion-factor-126-7/ Hmm, I'm not very impressed with that and IMHO their statement "Solar Radiation is a shorter wave length" is misleading and argu...
- Thu 16 Sep 2021 8:37 am
- Forum: General
- Topic: UV-Sensor for WH-3080
- Replies: 1
- Views: 1203
Re: UV-Sensor for WH-3080
Hi,
Welcome to the forum. Is this what you are looking for?
https://www.ebay.co.uk/itm/303574269608
They do appear to ship to Germany, with quite a reasonable shipping charge (VAT is arranged/paid via ebay/Paypal).
Cheers, Alan.
Welcome to the forum. Is this what you are looking for?
https://www.ebay.co.uk/itm/303574269608
They do appear to ship to Germany, with quite a reasonable shipping charge (VAT is arranged/paid via ebay/Paypal).
Cheers, Alan.
- Sat 24 Jul 2021 8:37 am
- Forum: Fine Offset/EasyWeather
- Topic: W-8681-SOLAR no outdoor temp/humidity/wind readings
- Replies: 3
- Views: 1460
Re: W-8681-SOLAR no outdoor temp/humidity/wind readings
Hi, ... I manually reconnected the console to the transmitter, .... These stations use two totally separate transmissions for Temp/Hum/Wind/Rain and for Solar data, with different "source addresses" and timing periods (48 and 60 seconds). They use the same radio hardware (so that seems to ...
- Sun 11 Jul 2021 10:04 am
- Forum: Cumulus MX Current (releases since b3043)
- Topic: New weather station
- Replies: 13
- Views: 1489
Re: New weather station
Hi, I don't know about the "Devanti" (nor internet protocols in general), but the Console in the Australian review link does look very similar to the "Pro Signal" station on the CPC/Farnell website , which includes a free .PDF download of the "Operating Instructions". M...
- Sat 10 Jul 2021 8:43 am
- Forum: Cumulus MX Current (releases since b3043)
- Topic: New weather station
- Replies: 13
- Views: 1489
Re: New weather station
Hi, The ebay link appears to be broken, but the review is to an Ecowitt/Fine Offset which connects via WiFi (not USB) and is said to be compatible with MX. A similar version is available in UK from CPC for just over £100. However, I've seen numerous comments that the clarity (viewing angle) of the C...
- Sun 20 Jun 2021 8:52 am
- Forum: Fine Offset/EasyWeather
- Topic: WS3085 base station locking up
- Replies: 9
- Views: 6144
Re: WS3085 base station locking up
Hi,
Do you have the "Synchronise Fine Offset Reads" option set? It's a well known issue (and possibly the only solution), so try looking though a forum search if you haven't already. Over 100 hits I'm afraid.
Cheers, Alan.
Do you have the "Synchronise Fine Offset Reads" option set? It's a well known issue (and possibly the only solution), so try looking though a forum search if you haven't already. Over 100 hits I'm afraid.
Cheers, Alan.
- Wed 02 Jun 2021 9:02 am
- Forum: Cumulus MX Current (releases since b3043)
- Topic: Wind vane replacement
- Replies: 5
- Views: 819
Re: Wind vane replacement
Hi, , the wind vane broke irreparably. How "irreparably" ? Is the vertical shaft still accessible and/or functional? If so, it should be possible to fabricate (and attach with Epoxy glue) a new vane from sheet material, perhaps Acrylic, Aluminium or even recycled packaging material. The pr...
- Sat 15 May 2021 1:35 pm
- Forum: Fine Offset/EasyWeather
- Topic: Rebranded WH1080 Sync problems
- Replies: 3
- Views: 1786
Re: Rebranded WH1080 Sync problems
Hi, The transmitter LED lights up for several seconds when I reapply power then goes into the normal 22 second (approx) blink. The base station, upon powering up gives the normal Icon for searching for a signal for approx 10 seconds .... The WH1080 transmitter is a simple "Send and Hope" s...
- Thu 08 Apr 2021 9:08 am
- Forum: Davis VP/VP2/Vue
- Topic: RJ11 connectors
- Replies: 6
- Views: 2712
Re: RJ11 connectors
Hi, Also on ebay, where you can find a suitable crimping tool at a ridiculously low price, for example this (chosen at random) or even with a cable tester for not much more. FWIW the 6-pole version (same size, more contacts) is called RJ12. Or ready-made cables (which you might cut into two) are use...
- Wed 10 Feb 2021 11:12 am
- Forum: Fine Offset/EasyWeather
- Topic: WH3081 console replacement
- Replies: 6
- Views: 1923
Re: WH3081 console replacement
Hi, Yes, certainly check for simple "mechanical" problems first. The two "sticky" threads at the top of this (Fine Offset) section may give a few hints on dismantling the Console. AFAIK, the vast majority of "Similar Looking" Consoles are made by the same manufacturer (...
- Wed 03 Feb 2021 1:45 am
- Forum: Fine Offset/EasyWeather
- Topic: Maplin Forum discussions on 433.92MHz interference
- Replies: 5
- Views: 4562
Re: Maplin Forum discussions on 433.92MHz interference
Hi, Welcome to the forum. If your WH1080 is around 10 years old and 868 MHz, then it may well use the "old" integrated FSK chipset which is totally incompatible with the later OOK protocol (and IMHO not "hackable"). IIRC, Clas Ohlson were still selling this format in around 2013-...