Cumulus Support

faa440

That worked! Thanks so much. Will also pass onto RSHosting.

faa440

I am in the process of transferring my Cumulus v1.9.4 from Windstream webhost (still active) to RSHosting. I have been working with RSHosting support for over two days and we cannot get Cumulus to upload to the proper directory. I went with RSHosting as it was recommended in the Cumulus Webspace Wik...

faa440

Steve,
Please add me to the MX beta test program.
Thank you.

faa440

I saw an unexpected discrepancy today on my Davis VP2 console regarding readings between "Daily Rain" and "Rain Storm" -- daily rain amount is 0.01" (or one tip) greater than rain storm. The Davis manual states that, "It takes two tips of the rain bucket to begin a stor...

faa440

As part of your research on the Davis 6153, you might check out the reference documents on the Davisnet site at http://www.davisnet.com/weather/products/wx_product_docs.asp?pnum=06153 . The document, " Derived Variables in Davis Weather Products " is a good source of information on the log...

faa440

Build 1092 works perfectly all the way through to the data sent to CWOP. MSLP remained where it should while my AP error in CWOP has now been eliminated. Users should be reminded to set DavisCalcAltPress=1 in Cumulus.ini for this change to take effect; otherwise, AP will be reported as MSLP. What so...

faa440

Yes, that would be straightforward; I'll look at doing it. Just to clarify, though: this would be used only in the calculation of AP from the derived station pressure, not in the derivation of station pressure from MSLP, as the point of using the station elevation figure for that is that the statio...

faa440

I also meant to add that the proposed modification in my previous post should still work with the change made in build 1090 so that the pressure calibration offset in 1090 could still be applied to both the AP and MSLP parameters.

faa440

:bash: Davis does this to me too. Thank you for considering a modification. Here is a proposal for you to consider that hopefully would minimize Cumulus modifications. Leave everything as is, and then add a line in Cumulus.ini that would allow for a +/- offset that would be added to the elevation re...

faa440

Cumulus builds after 1090, where the barometric offsets for Davis stations have now been applied to both altimeter pressure (AP) as well as MSL pressures (MSLP), have actually started creating a problem for me because in my case, I have found the need to offset each independently. A long story follo...

faa440

Hi Steve, I noticed Davis recently came out with a revision (2.6.1, March 29, 2013) to their Serial Communication Reference Manual and in that revision made reference to description corrections to the THSW index in the LOOP 2 format table. I know you had previously tried to pull the THSW index into ...

faa440

Thank you for the support and will follow your guidance.

faa440

In place of the above conditional statement, tried to make the following expression work, but couldn’t; not sure why. _gaugeSolar.setThreshold(data.IsSunny ? -10000 : 10000); I think you would need: _gaugeSolar.setThreshold(data.IsSunny === "1" ? -10000 : 10000); That worked and thanks mu...

faa440

In keeping with the subject of this thread, tried setting up an LED on the solar gauge that would emulate the “Sun” LED on the Cumulus panel. This modification uses the <#IsSunny> webtag so it may only work for the Davis and Oregon systems. I'm not a JavaScript programmer, so appreciate any comments...

faa440

Following your lead, I found that the ‘today’s solar max’ alias/webtag wasn't present in “realtimegaugesT.txt”. By adding the term ,"SolarTM":"<#solarTH>" to "realtimegaugesT.txt", the maximum daily indicator on the solar gauge now appears to be working properly. Thanks

Cumulus Support

Search found 25 matches

Re: RSHosting Upload Issues

RSHosting Upload Issues

Re: Cumulus MX (Cumulus 3) beta test

Re: storm rain?

Re: Buying VP2 - best PC/Logger module for Cumulus?

Re: calibration and uploads to cwop

Re: calibration and uploads to cwop

Re: calibration and uploads to cwop

Re: calibration and uploads to cwop

Re: calibration and uploads to cwop

Re: New web tags <#THWindex> and <#THSWindex>

Re: LED's

Re: LED's

Re: LED's

Re: Max Indicator on Solar Gauge- V2.2.2