Cumulus Support

dids04

Hi Steve

December Log File & Diags Folder attached.

Also, I checked Cumulus and ignore LaCrosse Clock is NOT checked

Cheers

Dec12log.txt

Diags.zip

dids04

Good Evening It appears an error may exist in how cumulus calcs the highest hourly rain rate. heavyweather2.png cumulus.png As per the images attached, cumulus is taking 3 readings to work out the hourly rate. (perhaps because my setting is for 20 min. readings??) Problem is that it takes the record...

dids04

thanks for the replys. Had never thought about the battery issue in the cold so perhaps thats whats going on. (Athought I did have new batteries in there) When I have lost signal, I have been able to regain signal by removing the batteries from teh outside unti and re-insterting them, (This is obvio...

dids04

Hoping somebody with the above unit can provide some advice. Since the cold has set in since mid/late May (Melbourne Australia), my la crosse unit every 2nd morning or so loses its signal connection with the display showing "---" for all external readings. This can last for several hours. ...

dids04

Perfect.

Many Thanks Sunseeker.

dids04

Hi All I just recently set up a web page for a friend who i helped purchase an identical La Crosse 2306 unit to myself. For some reason, the web pages are different in that the "trends" page has all the graphs in bright green where as my was a neutral grey. Can't for the life of me figure ...

dids04

Thanks for the responses all Steve, I have attached a copy of the Diags folder but as you suggested, data was obtained from the logger. I don't run live but rather on a 20 minute setting, which I would have thought would make spikes quite rare. This is the 2nd low temp spike I've had since setting u...

dids04

Hi There. Had a spike in my readings overnight yet cumulus still recorded this even though I had the spike setting to 15C Heavyweather stats as follows: 7/3/12 2.00am 16.7c 7/3/12 2.20am 16.5c 7/3/12 2.40am -7.0c 7/3/12 3.00am 15.9c 7/3/12 3.20am 15.8c My understanding was the spike reading would no...

dids04

Thanks Graeme. Got both working now. Wasn't that I couldn't use both at once (I noticed in other posts that shouldn\t occur) but rather the heavy weather map would not start due to an error) Eventually managed to unistall and re-install with success. Everything appears to be in order now (i note the...

dids04

All Good Now. Thanks for your advice guys. Matt, further to the 2306, i'm interested to know how you went about how/where you setup your Thermo/Hygro Sensor. I've tried a few places but temperatures still aren't matching local reports (Have a BOM site only 4 kms away) so know that is pretty accurate...

dids04

thanks for the responses. I have been unable since setup to install Heavy Weather. I had this originally installed before Cumulus when it worked however after installing this, i now get an error at start. I do have another pc I have heavy weather loaded onto so i'll try and make the adjustments ther...

dids04

Hi all. Haver just purchased my first weather station and have setup with Cumulus as this seems the best available. I am having some difficultly though in my data results as all results posted to my webpage seem to be based on the hour. i.e. every record is at ??:34 am or pm. It appears therefore it...

Cumulus Support

Search found 12 matches

Re: Error in Cumulus Highest Hourly Rain Record

Error in Cumulus Highest Hourly Rain Record

Re: La Crosse 2306 - Signal dropping out most mornings pre-d

La Crosse 2306 - Signal dropping out most mornings pre-dawn

Re: Web Page Different for 2 users-same equipment LaCrosse 2

Web Page Different for 2 users-same equipment LaCrosse 2306?

Re: Spike Removal - Outdoor Temp

Spike Removal - Outdoor Temp

Re: La Crosse 2306 Setup with Cumulus

Re: La Crosse 2306 Setup with Cumulus

Re: La Crosse 2306 Setup with Cumulus

La Crosse 2306 Setup with Cumulus