Welcome to the Cumulus Support forum.

Latest Cumulus MX release v3.2.3 build 3059 - 04 December 2019.
    Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014

    See the Wiki for downloading either version.

    Search found 363 matches

    by Charlie
    Fri 17 Jul 2015 2:32 pm
    Forum: Cumulus MX
    Topic: Increasing Wind Speed and Gusts
    Replies: 24
    Views: 2812

    Re: Increasing Wind Speed and Gusts

    When you are saying timing, what does that involve? Is it how the data is read communicating with the USB? Or timing to do with some other issue? As Steve mentioned, likely the 150 ms sleep isn't long enough. My stations will take a bit longer to send the data than the Fine Offset, as it has more e...
    by Charlie
    Tue 14 Jul 2015 11:53 am
    Forum: Cumulus MX
    Topic: Increasing Wind Speed and Gusts
    Replies: 24
    Views: 2812

    Re: Increasing Wind Speed and Gusts

    Sorry folks - have been travelling and just returned. I'll try to poke a bit this week, but I have not even started to look at MX as I don't own a PI. I do agree with Steve that this is likely a timing issue, but can't imagine why it should be so.
    by Charlie
    Tue 13 Jan 2015 3:00 pm
    Forum: Homebuilt
    Topic: Fine offset USB power
    Replies: 3
    Views: 1747

    Re: Fine offset USB power

    Actually the whole idea is bad. If you truly want to run wires out to your wireless transmitter location, buy a cheap 3V power supply through eBay or similar. Running a long wire from outdoors to your computer is a great way to inject lightning into your computer to make the magic smoke leak out. Ev...
    by Charlie
    Tue 22 Jul 2014 3:48 am
    Forum: Homebuilt
    Topic: AERCUS INSTRUMENTS WS3083 PRO
    Replies: 1
    Views: 1804

    Re: AERCUS INSTRUMENTS WS3083 PRO

    Looks like it has some potential to work depending on what software it comes with, but would require a test to be sure. It appears to be used for sharing storage typically, and the weather station is very different, so the device would need to support the HID device driver, not the mass storage devi...
    by Charlie
    Mon 12 May 2014 2:12 pm
    Forum: Fine Offset/EasyWeather
    Topic: Maplin station range issue
    Replies: 14
    Views: 2670

    Re: Maplin station range issue

    My thinking on batteries is indeed to use 1 x LiFeP04, with a dummy cell, simply to get the best possible voltage. I use them in other radio gear, and they are very good. I've used a different concept on my own station at home, I have a mains power unit, with backup dry cells behind a diode so that...
    by Charlie
    Sun 02 Mar 2014 4:15 pm
    Forum: Fine Offset/EasyWeather
    Topic: tweaking readings for errors
    Replies: 2
    Views: 683

    Re: tweaking readings for errors

    I thought that was the case - then I saw that indoor temperature was there. So then I thought it might be that there just wasn't space in the calibration popup, and it might still be available in the cumulus.ini file. But it wasn't in the documentation, so I thought I'd just ask LOL. Thanks for a qu...
    by Charlie
    Sun 02 Mar 2014 2:16 pm
    Forum: Fine Offset/EasyWeather
    Topic: tweaking readings for errors
    Replies: 2
    Views: 683

    tweaking readings for errors

    It looks like Cumulus can correct for minor errors of almost every parameter except indoor humidity. Is this an oversight, or is there an undocumented line in the cumulus.ini that can be used to calibrate this measurement too?
    by Charlie
    Tue 28 Jan 2014 1:53 pm
    Forum: Homebuilt
    Topic: ACCURATE THERMOMETER
    Replies: 6
    Views: 2763

    Re: ACCURATE THERMOMETER

    Another "classic" temperature sensor is the DS18B20; a little more expensive, with a similar accuracy. But as it gives a digital output (SPI "one wire" bus) to 1/16 degree C resolution, there are no further potential errors of D-A conversion and/or reference voltages, etc.. The data sheet seems to ...
    by Charlie
    Mon 30 Dec 2013 1:21 pm
    Forum: Homebuilt
    Topic: cold weather wiring
    Replies: 10
    Views: 3198

    Re: cold weather wiring

    Hi Tony, How far is the transmitter from the receiver? Orientation can help as well. I was also originally worried about accessibility for changing batteries often, but my lithiums are now approaching their four year anniversary and are still going strong. Also, FYI, what many of us do is extend the...
    by Charlie
    Mon 23 Dec 2013 2:08 pm
    Forum: Homebuilt
    Topic: cold weather wiring
    Replies: 10
    Views: 3198

    Re: cold weather wiring

    I think your unit may be broken. I'm running a 1080 just down the road from you in Whitehorse, and have had absolutely no issues at -40 with lithiums. Even alkalines are fine to about 30' at those temps. I'm also running a custom built station that initially had issues with temperatures below about ...
    by Charlie
    Mon 11 Nov 2013 2:46 pm
    Forum: Homebuilt
    Topic: Using WH1080 wind sensors with custom weather station
    Replies: 6
    Views: 8716

    Re: Using WH1080 wind sensors with custom weather station

    Yes it's possible, and all the information is here on the forum. Start with the search button. We'll be happy to help if you have questions.
    by Charlie
    Sat 17 Aug 2013 7:59 am
    Forum: Fine Offset/EasyWeather
    Topic: WH-1080 "class ohlson" showing too low wind speed values
    Replies: 7
    Views: 2245

    Re: WH-1080 "class ohlson" showing too low wind speed values

    Hello. Is there a custom firmware or way to modify the wind speed sensor to show higher values on main unit ? I am constantly getting 4-5 m/s too low gust speeds. Shoud I shorten cup rods ? :shock: :shock: :shock: It would be almost impossible to do that and maintain balance. Why not simply change ...
    by Charlie
    Sat 10 Aug 2013 6:41 am
    Forum: General
    Topic: WH1081 USB device
    Replies: 2
    Views: 792

    Re: WH1081 USB device

    The cable is a defacto "standard" - that is to say, while it is not covered by the USB spec, many manufacturers have gone this route for everything from weather stations to portable hard drives. You can likely pick up similar cables in any corner store, and yes it is straight through. The issue you ...
    by Charlie
    Sun 30 Jun 2013 9:56 am
    Forum: Fine Offset/EasyWeather
    Topic: 0.01" vs. 0.3 mm Rain Gauge Bucket Tips
    Replies: 19
    Views: 6897

    Re: 0.01" vs. 0.3 mm Rain Gauge Bucket Tips

    Mark, the issue isn't rounding - it's un-rounding a previously rounded number and then multiplying to amplify the error even further. I think you need the original tip count. You can calculate that as an intermediate step and use Excel to round to an integer, but it will be +/- 1 tip, which unfortun...