Cumulus Support

wetterfrosch1971

I found the problem, it was an electrical relay which controls a central heating pump.
when the relay switched, it caused the spike.
i have now connected a special rc suppressor to the switching contact of the relay and now the spikes are gone.

wetterfrosch1971

no, I don't have any peaks in temperature.
the cable from speed sensor is shielded and the shield is connected to ground.

wetterfrosch1971

do you think the problem is with the wind wheel or rather with the console or the transmitter?

wetterfrosch1971

the time line is only broken down more roughly for the air pressure, for all other graphics it always goes back to the 1 hour interval and makes the whole thing a bit confusing in my opinion.
as with the air pressure, i find the division of the time line better.
my preferred interval is 24 hours.

wetterfrosch1971

I found out the problem with the wrong size, in the internet settings of cumulus the check mark for web graphs "resize (width 750/high 300)" was missing. now the only question that remains is how can i change the time line from 1h interval in a other interval? i just noticed that the barom...

wetterfrosch1971

your graphic is just as big as the graphic below it, that was the case for me before, but not anymore and I don't know why. that is my problem. what strikes me right now is that your timeline is in 6-hour intervals, but mine is in 1-hour intervals, I mean I used to have a 6-hour interval, can I set ...

wetterfrosch1971

Sorry, I may have expressed myself somewhat misleadingly. I don't mean the graph itself, it's about the box itself, the box goes to far to the right side, the box is not in the middle. the box used to be as big/wide as the graphic boxes above and below. and the German heading is on top of the Englis...

wetterfrosch1971

Hi, For some time now, the large graphic has been displayed incorrectly and I don't know why, I haven't changed anything, i.e. it has always worked before and now all of a sudden it has been wrong. You can also see that the German heading is simply on top of the English one, which wasn't the case be...

wetterfrosch1971

Hi, I have been running a wh1080 with cumulus 1 for over 10 years without any problems. now the station produces a gust spike of about 30km/h above the last gust 1-2 times a day, although there are currently no major gusts. the solution using the spike removal makes no sense, because if there really...

wetterfrosch1971

Hi, so far i have a wh1080 and read it out via usb with cumulus. now i have a new station, but it no longer has a usb interface but sends me the measured values to my server via wifi. Is there a possibility that cumulus reads this data file? i want to keep cumulus because my whole homepage is genera...

wetterfrosch1971

however, the current rain rate is not sent.
the hourly amount of rain is sent to wu as the rain rate.

wetterfrosch1971

Hi,

on wunderground the hourly precipitation is displayed as the rain rate.
I assume the variable #rhour instead of #rrate is transferred to wunderground.
Can I change or set this somewhere?

Many thanks for help.
Frank

wetterfrosch1971

If I install the new setup, will it overwrite my entire current cumulus program? i.e. all settings and data that I have created are gone afterwards? i have rewritten my cumulus webpage to german, will this data be gone after installing the new setup?

wetterfrosch1971

I've downloaded here: https://cumuluswiki.org/Downloads/cumulus.1099.2.zip then i unpacked the file and replaced cumulus.exe in my cumulus program with this new cumulus.exe Cumulus then works perfectly, i can now select from the year 2000-2030 in the history, the only problem now is that certain htm...

wetterfrosch1971

if i use the new cumulus.exe, the htm pages no longer work, they are sent to the webspace, but have 0kb and only a white empty page is displayed, i use the old cumulus.exe again, then everything works again. I've tried this several times, every time I use the new cumulus.exe, the pages are empty aft...

Cumulus Support

Search found 123 matches

Re: wh1080 produces wrong gust spike - need help

Re: wh1080 produces wrong gust spike - need help

Re: wh1080 produces wrong gust spike - need help

Re: the big graphic in cumulus1 is wrong

Re: the big graphic in cumulus1 is wrong

Re: the big graphic in cumulus1 is wrong

Re: the big graphic in cumulus1 is wrong

the big graphic in cumulus1 is wrong

wh1080 produces wrong gust spike - need help

read data file with cumulus instead of usb?

Re: Rainrate to wunderground is wrong

Rainrate to wunderground is wrong

Re: Year range for viewing data, ended in 2020

Re: Year range for viewing data, ended in 2020

Re: Year range for viewing data, ended in 2020