Cumulus Support

DesertRat

I figured it out: time was so off ntp couldn't fix ................................... ntptime ntp_gettime() returns code 5 (ERROR) time e86bb6e5.060b7000 Wed, Jul 26 2023 8:14:45.023, (.023612), maximum error 16000000 us, estimated error 16000000 us, TAI offset 0 ntp_adjtime() returns code 5 (ERROR...

DesertRat

I have an interesting thing going on Cumulus MX 3.25.2 b. I had a power outage last night (~5 hours). Power company equipment failure. The outage lasted longer than all my UPS could supply backup power. My Davis Vantage Pro 2 console with an attached IP data logger didn't go down, but the network di...

DesertRat

Well after seriously considering throwing Cumulus out with the bath water and moving on to something else. In desperation, I took another Pi out of the drawer, because everyone has a half a dozen of those laying around right? I flashed it with Mark's CMX Pi Image and then unzipped 3.11.4 (b3133) ove...

DesertRat

Well just to make sure the new router wasn't part of the problem, which I was 98% sure it wasn't, I put the old router back in place and everything else like it was before. Problem still present. Something in my Cumulus installation is corrupt.

DesertRat

The router doesn't handle their local LAN traffic. Is the dumb switch connected to the router? What do the two devices have set as gateway? The IP loggers use the LAN address on the router. The dumb switches don't have configurations for gateway. They are auto uplink. The LAN side of the router is ...

DesertRat

No go on the other Weatherlink IP. Same connection errors for both WLIP on CumulusMX 3.11.46 (build 3133). It was worth a shot. It does tell me that the problem lies with my pi CumulusMX install though.

DesertRat

My money would be on your router causing the problem. Possibly blocking the particular Comms required to your weather station. @mcrossley will be able to advise a bit better than me, but I think it's a particular protocol that is being blocked. The router isn't the issue. Like I mentioned in my ori...

DesertRat

My Cumulus 3.11.4 (build 3133) stopped receiving station data after changing out my Ubiquiti Edge Router and installing a Fortinet 30E. The WeatherLink IP and my pi aren't even plugged directly into the Fortinet. They are plugged into separate dumb Linksys switches on the same LAN that they have alw...

DesertRat

Thanks for the response Mark. That narrows the intended design info I need to continue my troubleshooting. I'll keep playing with it. The worse thing I can do is break it.

DesertRat

I have been a long time Cumulus user. Started way back with SandaySoft running Cumulus on a dedicated laptop that was also running home automation before it was a thing. I'm currently running MX 3.9.2 build 3097 on rpi buster. I feed my wireless Davis VP2 plus data to CumulusMX via a Davis IP logger...

Cumulus Support

Search found 10 matches

Re: Data Mismatches

Data Mismatches

Re: WeatherLink IP Stopped Connecting

Re: WeatherLink IP Stopped Connecting

Re: WeatherLink IP Stopped Connecting

Re: WeatherLink IP Stopped Connecting

Re: WeatherLink IP Stopped Connecting

WeatherLink IP Stopped Connecting

Re: Hybrid IP Logger/WWL CumulusMX Setup

Hybrid IP Logger/WWL CumulusMX Setup